==Operating the Vencube with a Höfer HVMC-100 Controller==

===Requirements===

For MDB operation of the Vencube with an HVMC controller, the use of an EPROM with the software version: 
<code>HVMC 100-CC Version 1.38EUR (2Mbit)</code> 
is mandatory! EPROMs larger than 1Mbit cannot be used in the first series of HVMC controllers; for this reason, only a BDV Vencube can be used. All subsequent HVMC controllers are equipped for MDB operation with a Vencube after a software update. These controllers can be distinguished by the printed labels.

===HVMC 100===

{| class="wikitable" border="1"
|-
|[[File:HVMC_100_Inscription.jpg|250px|]]
| style="text-align:center" |
'''Print: HVMC 100:''' 
 
Vencube can only be connected under BDV!
|}

===HVMC 100-1/-2/-3===

{| class="wikitable" border="1"
|-
|[[File:HVMC_100-1_Inscription.jpg|250px|]]
|[[File:HVMC_100-2_Inscription.jpg|250px|]]
|[[File:HVMC_100-3_Inscription.jpg|250px|]]
|-
| colspan="3" style="text-align:center" |
'''Print: HVMC 100-1/-2/-3''' 
 
MDB operation with a Vencube is possible after a software update!
|}

*Software version <code>HVMC 100 Version 1.38 EUR</code> must be used.
*Convert the controller to MDB operation: →Set DIP switch 2 to OPEN.
*Set <code>C8.A with Display Card Amount</code> in the menu.

After replacing the EPROM, the controller must be initialized and reconfigured. All previous data will be lost.

==Connecting the Vencube with the MDB Interface==

===Preparation===

#Disconnect the vending machine control system from the power supply (press the main switch or disconnect ST7).
#Check the EPROM version: <code>HVMC 100-CC Version 1.00</code> must be replaced with <code>HVMC 100-CC Version 1.38</code>! Note the installation direction; the notch on the EPROM and IC socket is important, not the EPROM sticker.
#Insert the Vencube into the MDB interface of the control system.
#Connect MDB payment systems to the Vencube via MDB.
#Turn on the vending machine.

===Initialize the controller===

#The following display should now appear: <code>EPROM swap -> Initialize!</code>
#Set DIP switches 1 and 5 to the edge of the board and 2-4 to OPEN (controller initialization)!
#Press the star button
#The following will appear on the LCD: <code>Clear ??</code>
#Now press selection button 5 on the machine.
#Now set all DIP switches to OPEN again.
#Wait until the display shows <code>Help! F6</code>.
#Either continue with the section [[Vencube in conjunction with an HVMC-100 controller#Switching to a two-line display|'''"Switching to a two-line display"''']] or continue with the section [[Vencube in conjunction with an HVMC-100 controller#Switching to MDB mode|'''"Switching to MDB mode"''']].

===Switching to a two-line display===

{| class="wikitable float-right mw-collapsible mw-collapsed"
|-
! colspan="3" |Function of the selection keys in the service menu
|-
|Select 1
|Back from the submenu
|{{Pfl}}
|-
|Select 2
|Step forward (larger) in the menu
|{{Pfo}}
|-
|Select 3
|Step back (smaller) in the menu
|{{Pfu}}
|-
|Select 4
|Call (enter) the selected menu item
|{{Pfr}}
|-
|Select 5
|Special functions (delete)
|Clear
|}

#If a two-line display is installed, the display setting must be changed to 2 lines with 16 characters. '''Important:''' With a single-line LCD display, this step can be skipped!
#Press the star button for more than 5 seconds: <code>Clr ERR!</code> appears (continue to hold) and wait for the <code>ServMenu</code> display and release. Following: <code>C 0. .</code>
#Press selection button 2: You will be asked for a password! <code>PW ????</code> The password is 4231, press the respective selection buttons and after entering it, the following appears: <code>C 1. .</code>
#Press selection button 4 and press selection button 2 several times to go to the menu item <code>C 1.C.</code>.
#Use selection key 4 to call up the setting <code>1Zl.8St.</code> and use selection key 2 to set it to two lines. <code>2Zl.16St</code>
#Use selection key 1 to go back until <code>C 0. .</code> appears on the display.
#Press the star key
#Wait until <code>Help! F6</code> appears on the display.

===Switch to MDB operation===

#Activate the MDB credit system: Set DIP switches 1 and 3-5 to OPEN and DIP switch 2 to the board edge.
#If necessary, activate the blank lamp control for GP: Set DIP switch 4 to the board edge as well.
#Press the star button After the controller has booted up, one of the two displays should appear. Either: <code>No change!</code> or: <code>Hello</code>

===Setting the machine===

{| class="wikitable float-right mw-collapsible mw-collapsed"
|-
! colspan="3" |Function of the selection buttons in the service menu
|-
|Select 1
|Back from the submenu
|{{Pfl}}
|-
|Select 2
|Step forward (larger) in the menu
|{{Pfo}}
|-
|Select 3
|Step back (smaller) in the menu
|{{Pfu}}
|-
|Select 4
|Call (enter) the selected menu item
|{{Pfr}}
|-
|Select 5
|Special functions (Delete)
|Clear
|}

#Press the star button for more than 5 seconds: <code>Clr ERR!</code> appears (continue to hold) and wait for the <code>ServMenu</code> display and release. Following: <code>C 0. .</code>
#Press selection button 2: You will be asked for a password! <code>PW ????</code> Password is 4231, press the corresponding selection keys and after entering the following appears: <code>C 1. . </code>
#Now configure the machine in the following menu items:
##<code>C1.3 </code> Set the date and time
##<code>C1.6 </code> Specify the number of slots
##<code>C1.1 </code> Assign the selection keys to the outputs
##<code>C6 </code> Price setting
##'''Important!:''' <code>C8 </code> Set the credit system setting in menu item <code>C8.A</code> to "display with card amount"!
#Use key 1 to menu item <code>C 0. . </code>
#Press the star button.
#Turn off the machine, wait a few seconds, and turn it back on.
#Test the sale.

=== Setting up Vencube via Ventoolwin ===

{| class="wikitable" width="60%" border="1"
! width="20%" |Program area
! width="40%" |Function
|-
| style="vertical-align:top" |[[File:VTW_Automat_1.png]]
| style="vertical-align:top" |
;HVMC
:Check the '''HVMC''' field!
:This setting is for the correct function of the "No Change" message in conjunction with an '''HVMC 100''' controller. Use this function only with an HVMC controller!

:The EVA field CCRBLC is set to 1: <code>MA5*CCRBLC*1</code>
|-
| style="vertical-align:top" |[[File:VTW_Münzwechsler_Banknoteleser_1.png]]
| style="vertical-align:top" | "No Change" limit or "No Change" message
: Set the value identically in the <code>C 8.8</code> menu of the controller and in the Vencube.
|}

{| class="wikitable"
|-
! Downloads
|-
|[[Medium:Preparing and setting up the Höfer HVMC-100 controller for operation with a VenCube.pdf|Here we offer instructions for installing the Vencube on an HVMC controller for download.]]
|}

[[Category:Index]]
[[Category:Instructions]]
[[Category:Sielaff]]
[[Category:Vendo]]

2025-03-17T13:33:36Z

Ojotzo:

== General ==

Different price lists can be configured in Vencube to change the sales prices depending on the configuration of a vending machine. 
The following instructions describe which price list configurations are possible and how prices can be set for different products and payment systems.

{| class="wikitable"
| [[Datei:Hinweis.png|50px]]
| style="background-color:#b1cded; width:44em"|
Prices must always be specified in cents. 
The Vencube can support price configurations for up to 100 different selections.
|}

== Setting the price list in Ventool ==

{|
|-
| style="width:35em" valign="top" |
;Step 1:
:Create an initial price list. 
:Alternatively, an EVA55 configuration file already present on the device can be imported here. In this case, step 2 is omitted.
| style="vertical-align:top"|
[[Datei:VT PL 02.png|links|mini|300px|Create/Read]]
|-
| style="width:35em" valign="top" |
;Step 2:
:Enter the start value for the selections on the machine.
| style="vertical-align:top"|
[[Datei:VT PL 03.png|links|mini|300px|Start number]]
|-
| style="width:35em" valign="top" |
;Step 3:
:An initial price list will then automatically open, with selections from "Starting Value" to "Starting Value + 100."
:Here, each individual selection can be assigned a price (in cents) per price line.
{| class="wikitable"
| [[Datei:Hinweis.png|50px]]
| style="background-color:#b1cded; width:44em"|
0000 cents ⇒ Call is issued free of charge (free sale). 
9999 cents ⇒ Initial price of the price list.
|}
| style="vertical-align:top"|
[[Datei:VT PL 04.png|links|mini|600px|Initial price list]]
|-
| style="width:35em" valign="top" |
;Step 4:
:After all prices have been entered, they must be assigned to the desired price list:
{| class="wikitable"
|-
! style="width:40em;" | Used price list cash
! style="width:40em;" | Used price list card
|-
| Standard (Prices from VMC)
| Standard (Prices from VMC)
|-
| Price list 1
| Price list 1
|-
| Price list 2
| Price list 2
|-
| Price list 3
| Price list 3
|-
|}
| style="vertical-align:top"|
[[Datei:VT PL 05.png|links|mini|600px|Price list cash ⇒ Price list 1 Price list card ⇒ Price list 2]]
|}

== Explanation of EVA List 55 ==

=== EVA55 Code ===

==== EVA 55 read out ====

{| class="wikitable"
! style="width:30em;" | Initial EVA 55 list
|-
|
DXS*HOE0000000*VA*V1/1*1
ST*001*0001
MA5*HEADER*55*250214*115752
ID1*HOE12345678**1*LOC*0**6*0
CB1*00019140*VCS4ac04*Ver94.36**
ID4*2*1978*EUR
MA1*HOE12345678*0
PA55*1*10*10*10*10*10
PA55*2*20*20*20*20*20
PA55*3*30*30*30*30*30
PA55*4*40*40*40*40*40
PA55*5*50*50*50*50*50
G85*F7DE
SE*39*0001
DXE*1*1
|}

==== EVA 55 write ====

{| class="wikitable"
! style="width:30em;" | EVA 55 writ
|-
|
PC1*1*1*9999*
PC1*2*1*9999*
PC1*3*1*9999*
PC1*1*2*9999*
PC1*2*2*9999*
PC1*3*2*9999*
PC1*1*3*9999*
PC1*2*3*9999*
PC1*3*3*9999*
PC1*1*4*9999*
PC1*2*4*9999*
PC1*3*4*9999*
PC1*1*5*9999*
PC1*2*5*9999*
PC1*3*5*9999*
MA5*PLCD*1*1*0*0*0
|}

=== EVA55 table ===

==== EVA 55 read out ====

{| class="wikitable"
|-
! style="width:14em;" | EVA 55 Fields Table
! style="width:25em;" | Element Description
! style="width:25em;" | Beschreibung der Felder
|-
! style="vertical-align:top; text-align:left;" rowspan="7"|
PA55*1*0*0*0*0*0
! style="vertical-align:top; text-align:left;"| Receive price list
! style="vertical-align:top; text-align:left;"| Preisliste empfangen
|-
| 1-99 = selection number
| 0-99 = Anwahlnummer
|-
| 0-9999 = konfigurated standard price (in cent)
| 0-9999 = Eingestellter Standard Preis (in Cent)
|-
| 0-9999 = price in price list 1 (in cent)
| 0-9999 = Preis in Preisliste 1 (in Cent)
|-
| 0-9999 = price in price list 2 (in cent)
| 0-9999 = Preis in Preisliste 2 (in Cent)
|-
| 0-9999 = price in price list 3 (in cent)
| 0-9999 = Preis in Preisliste 3 (in Cent)
|-
| 0-9999 = price vending machine (in cent)
| 0-9999 = Preis Automat (in Cent)
|-
|}

==== EVA 55 write ====

{| class="wikitable"
|-
! style="width:14em;" | EVA 55 Fields Table
! style="width:25em;" | Element Description
! style="width:25em;" | Beschreibung der Felder
|-
! style="vertical-align:top; text-align:left;" rowspan="4"|
PC1*1*1*0*
! style="vertical-align:top; text-align:left;"| Send price list 1
! style="vertical-align:top; text-align:left;"| Preisliste 1 senden
|-
| price list 1
| Preisliste 1
|-
| 1-99 = selection number
| 1-99 = Anwahl
|-
| 0-9999 = price (in cent)
| 0-9999 = Preis (in Cent)
|-
! style="vertical-align:top; text-align:left;" rowspan="4"|
PC1*2*1*0*
! style="vertical-align:top; text-align:left;"| Send price list 2
! style="vertical-align:top; text-align:left;"| Preisliste 2 senden
|-
| price list 2
| Preisliste 2
|-
| 1-99 = selection number
| 1-99 = Anwahl
|-
| 0-9999 = price (in cent)
| 0-9999 = Preis (in Cent)
|-
! style="vertical-align:top; text-align:left;" rowspan="4"|
PC1*3*1*0*
! style="vertical-align:top; text-align:left;"| Send price list 3
! style="vertical-align:top; text-align:left;"| Preisliste 3 senden
|-
| price list 3
| Preisliste 3
|-
| 1-99 = selection number
| 1-99 = Anwahl
|-
| 0-9999 = price (in cent)
| 0-9999 = Preis (in Cent)
|-
! style="vertical-align:top; text-align:left;" rowspan="6"|
MA5*PLCD*1*1*0*0*0
! style="vertical-align:top; text-align:left;"| price list definition
! style="vertical-align:top; text-align:left;"| Preislisten Definition
|-
|
Used price list cash 
0 = VMC prices 
1 = Price list 1 in the Vencube 
2 = Price list 2 in the Vencube 
3 = Price list 3 in the Vencube
|
Genutzte Preisliste Bargeld 
0 = VMC Preise 
1 = Preisliste 1 im Vencube 
2 = Preisliste 2 im Vencube 
3 = Preisliste 3 im Vencube
|-
|
Used price list card 
0 = VMC prices 
1 = Price list 1 in the Vencube 
2 = Price list 2 in the Vencube 
3 = Price list 3 in the Vencube
|
Genutzte Preisliste Karte 
0 = VMC Preise 
1 = Preisliste 1 im Vencube 
2 = Preisliste 2 im Vencube 
3 = Preisliste 3 im Vencube
|-
|
cash/card in beginning session to the machine 
0 = off 
1 = on
|
Bar/Karte in Begin Session zum Automaten 
0 = aus 
1 = an
|-
|
Used price list for separate cards (selected card price lists in KPLG) 
0 = VMC prices 
1 = Price list 1 in the Vencube 
2 = Price list 2 in the Vencube 
3 = Price list 3 in the Vencube
|
Genutzte Preisliste für gesonderte Karten (Ausgewählte Kartenpreislisten in KPLG) 
0 = VMC Preise 
1 = Preisliste 1 im Vencube 
2 = Preisliste 2 im Vencube 
3 = Preisliste 3 im Vencube
|-
|
Used price list Cashless Device2 (Close Loop) 
0 = VMC prices 
1 = Price list 1 in the Vencube 
2 = Price list 2 in the Vencube 
3 = Price list 3 in the Vencube
|
Genutzte Preisliste Cashless Device2 (Close Loop) 
0 = VMC Preise 
1 = Preisliste 1 im Vencube 
2 = Preisliste 2 im Vencube 
3 = Preisliste 3 im Vencube
|-
|}

[[Category:Index]]
[[Category:Instructions]]
[[Category:Help]]
[[Category:Ventool]]

Vensells CL Settings (EVA 15)

2025-03-17T13:32:36Z

Ojotzo:

== General ==

If a serial closed-loop card reader is connected to the Vencube, the individual (employee) cards or chips can be preconfigured with various special settings. 
Depending on the desired setting, this must also be activated in the affected Vencube according to the following pattern.

== Explanation of EVA List 15 ==

=== EVA15 Code ===

{| class="wikitable"
! style="width:30em;" | Initiale EVA 15 Liste
|-
|
DXS*HOE0000000*VA*V1/1*1
ST*001*0001
MA5*HEADER*15*250306*120248
ID1*HOE12345678**1*LOC*0**6*0
CB1*00000069*VCS4ab06*Ver94.35**
MA5*MZP*0
MA5*PPM*0*0*0*0*0
MA5*GG*0*0*0*0*0
MA5*BGG*0*0*0*0*0
MA5*PG*1*0*0*0*0*0
G85*5AE0
SE*10*0001
DXE*1*1
|}

=== EVA15 Table ===

{| class="wikitable"
|-
! style="width:14em;" | EVA 15 Fields Table
! style="width:25em;" | Element Description
! style="width:25em;" | Beschreibung der Felder
|-
! style="vertical-align:top; text-align:left;" rowspan="5"|
MA5*MZP*0
! style="vertical-align:top; text-align:left;"| Employee pays (only) deposit: (EVA55)
! style="vertical-align:top; text-align:left;"| Mitarbeiter Zahlt (nur) Pfand: (EVA55)
|-
| 0 = no
| 0 = nein
|-
| 1 = Price list 1 in the Vencube in which the deposit amount is listed
| 1 = Preisliste 1 im Vencube in welcher der Pfandbetrag steht
|-
| 2 = Price list 2 in the Vencube in which the deposit amount is listed
| 2 = Preisliste 2 im Vencube in welcher der Pfandbetrag steht
|-
| 3 = Price list 3 in the Vencube in which the deposit amount is stated
| 3 = Preisliste 3 im Vencube in welcher der Pfandbetrag steht
|-
! style="vertical-align:top; text-align:left;" rowspan="6"|
MA5*PPM*0*0*0*0*0
! style="vertical-align:top; text-align:left;"| Max number of deposit bottles that are allowed before the employee has to return the bottles, per product group
! style="vertical-align:top; text-align:left;"| Max Anzahl an Pfandflaschen die erlaubt sind, bevor der Mitarbeiter die Flaschen zurückgeben muss, je Produktgruppe
|-
| Groups 1: 0 Disabled, 1-255: Number
| Gruppen 1: 0 Deaktiviert, 1-255: Anzahl
|-
| Groups 2: 0 Disabled, 1-255: Number
| Gruppen 2: 0 Deaktiviert, 1-255: Anzahl
|-
| Groups 3: 0 Disabled, 1-255: Number
| Gruppen 3: 0 Deaktiviert, 1-255: Anzahl
|-
| Groups 4: 0 Disabled, 1-255: Number
| Gruppen 4: 0 Deaktiviert, 1-255: Anzahl
|-
| Groups 5: 0 Disabled, 1-255: Number
| Gruppen 5: 0 Deaktiviert, 1-255: Anzahl
|-
! style="vertical-align:top; text-align:left;" rowspan="6"|
MA5*GG*0*0*0*0*0
! style="vertical-align:top; text-align:left;"| Global groups, product groups of individual products are supplemented with the product group set here
! style="vertical-align:top; text-align:left;"| Globale Gruppen, Produktgruppe der Einzelprodukte werden mit der hier eingestellten Produkgruppe ergänzt
|-
| Groups 1: 0 Disabled, 1: Enabled
| Gruppen 1: 0 Deaktiviert, 1: Aktiviert
|-
| Groups 2: 0 Disabled, 1: Enabled
| Gruppen 2: 0 Deaktiviert, 1: Aktiviert
|-
| Groups 3: 0 Disabled, 1: Enabled
| Gruppen 3: 0 Deaktiviert, 1: Aktiviert
|-
| Groups 4: 0 Disabled, 1: Enabled
| Gruppen 4: 0 Deaktiviert, 1: Aktiviert
|-
| Groups 5: 0 Disabled, 1: Enabled
| Gruppen 5: 0 Deaktiviert, 1: Aktiviert
|-
! style="vertical-align:top; text-align:left;" rowspan="6"|
MA5*BGG*0*0*0*0*0
! style="vertical-align:top; text-align:left;"| Operating Hours (EVA14) Global Groups as in MA5*GG but only at set times
! style="vertical-align:top; text-align:left;"| Betriebsbszeiten (EVA14) Globale Gruppen wie MA5*GG aber nur zu eingestellten Zeiten
|-
| Groups 1: 0 Disabled, 1: Enabled
| Gruppen 1: 0 Deaktiviert, 1: Aktiviert
|-
| Groups 2: 0 Disabled, 1: Enabled
| Gruppen 2: 0 Deaktiviert, 1: Aktiviert
|-
| Groups 3: 0 Disabled, 1: Enabled
| Gruppen 3: 0 Deaktiviert, 1: Aktiviert
|-
| Groups 4: 0 Disabled, 1: Enabled
| Gruppen 4: 0 Deaktiviert, 1: Aktiviert
|-
| Groups 5: 0 Disabled, 1: Enabled
| Gruppen 5: 0 Deaktiviert, 1: Aktiviert
|-
! style="vertical-align:top; text-align:left;" rowspan="7"|
MA5*PG*1*0*0*0*0*0
! style="vertical-align:top; text-align:left;"| Product groups for the respective selection number
! style="vertical-align:top; text-align:left;"| ProduktGruppen für die jeweilige Anwahl
|-
| 1-99 = selection number
| 1-99 = Anwahl
|-
| Groups 1: 0 Disabled, 1: Enabled
| Gruppen 1: 0 Deaktiviert, 1: Aktiviert
|-
| Groups 2: 0 Disabled, 1: Enabled
| Gruppen 2: 0 Deaktiviert, 1: Aktiviert
|-
| Groups 3: 0 Disabled, 1: Enabled
| Gruppen 3: 0 Deaktiviert, 1: Aktiviert
|-
| Groups 4: 0 Disabled, 1: Enabled
| Gruppen 4: 0 Deaktiviert, 1: Aktiviert
|-
| Groups 5: 0 Disabled, 1: Enabled
| Gruppen 5: 0 Deaktiviert, 1: Aktiviert
|-
|}

[[Category:Index]]
[[Category:Instructions]]
[[Category:Help]]
[[Category:Vensells CL]]

2025-03-14T15:25:18Z

Ojotzo:

Language/Sprache [https://wiki.vensoft.de/index.php/Hauptseite german]
{| cellspacing="10" cellpadding="0" border="0"
! colspan="5" style="color:white; background-color:#575757; height: 30px; width:75em" |Installation instructions for the Vencube according to vending machine manufacturers
! colspan="1" style="color:white; background-color:#D20A11; height: 30px; width:15em" |Problem solving
|-
|-
| style="background-color:#eeeeee; width:15em" valign="top" |
*[[Azkoyen]]
*[[Braumann]]
*[[Bianchi]]
*[[Crane]]
| style="background-color:#eeeeee; width:15em" valign="top" |
*[[EVOCA Group|EVOCA Group]]
*[[Jofemar]]
*[[Lavazza Professional|Klix]]
*[[Lavazza Professional]]
| style="background-color:#eeeeee; width:15em" valign="top" |
*[[Necta]]
*[[N&W]]
*[[OPUS]]
*[[Rheavendors Group]]
| style="background-color:#eeeeee; width:15em" valign="top" |
*[[Rheavendors Group|Servomat Steigler]]
*[[Saeco]]
*[[Sielaff]]
*[[Trautwein]]
| style="background-color:#eeeeee; width:15em" valign="top" |
*[[Vendo]]
*[[Wittenborg]]
*[[Wurlitzer]]
| colspan="1" rowspan="1" style="background-color:#fae6e7; width:15em" valign="top" |
*[[Problem solving]]
|-
! colspan="2" style="color:white; background-color:#575757; width:30em; height: 30px;" |Payment systems
! colspan="2" style="color:white; background-color:#575757; width:30em; height: 30px;" |Vencube
! colspan="2" style="color:white; background-color:#575757; width:30em; height: 30px;" |Ventool
|-
| style="background-color:#eeeeee; width:15em" valign="top" |
'''Card reader: Open Loop''' 
*[[Vensells OL|Vensells OL (Castles)]]
*[[CCV]]
*[[Feig]]
*[[Seco Karl4]]
*[[Nayax]]
| style="background-color:#eeeeee; width:15em" valign="top" |
'''Card reader: Close Loop''' 
*[[Vensells CL]]
*[[EKS Card reader]]
*[[MiZip]]
| colspan="2" rowspan="2" style="background-color:#eeeeee; width:30em" valign="top" |
'''instructions:''' 
*[[Vencube beta user manual]]
*[[Vencube alpha user manual]]
*[[Regular processes at the machine]]
*[[Vencube firmware designation]]
*[[Antenna exchange at the Vencube]]
*[[Klix-Key card system]]
*[[Shopping cart function]]
| colspan="2" rowspan="2" style="background-color:#eeeeee; width:15em" valign="top" |
'''instructions:''' 
*[[Ventool]]
*[[Lockdown mask]]
*[[Token|Token release]]
*[[Firmware update via Ventool]]
*[[Free vend]]
*[[Top up]]
*[[LAN/WiFi settings (EVA 99)]]
*[[Time-controlled operating mode (EVA 14)]]
*[[Vensells CL Settings (EVA 15)]]
|-
| style="background-color:#eeeeee; width:15em" valign="top" |
'''Coin changer :''' 
*[[Coinco coin changer|Coinco]]
*[[Coges coin changer|Coges]]
*[[CPI coin changer|CPI]]
*[[MEI coin changer|MEI]]
*[[NRI coin changer|NRI]]
*[[SuzoHapp coin changer|SuzoHapp]]
| style="background-color:#eeeeee; width:15em" valign="top" |
'''Billnote acceptor:''' 
*[[CashCode Billnote acceptor|CashCode]]
*[[CPI billnote acceptor|CPI]]
*[[ICT Banknotenleser|ICT]]
*[[MEI billnote acceptor|MEI]]
*[[SuzoHapp billnote acceptor|SuzoHapp]]
|-
! colspan="2" style="color:white; background-color:#575757; width: 30em; height: 30px;" |
! colspan="2" style="color:white; background-color:#575757; width: 30em; height: 30px;" |Vensoft
! colspan="2" style="color:white; background-color:#575757; width: 30em; height: 30px;" |EVA-lists
|-
| colspan="2" style="background-color:#eeeeee; width:15em" valign="top" |

| colspan="2" style="background-color:#eeeeee; width:15em" valign="top" |
'''instructions :''' 
*[[Firmware update via Vensoft]]
*[[Retrieve EVA lists via Vensoft]]
*[[Import EVA lists via Vensoft]]
*[[Notes on handling csv files]]
*[[Setting the cup cancellation function]]
*[[Create cashless projects]]
| colspan="2" style="background-color:#eeeeee; width:30em" valign="top" |
'''Instructions:''' 

*[[Retrieve EVA lists via Vensoft]]
*[[Import EVA lists via Vensoft]]
*[[Lockdown mask]]
*[[Top up]]
*[[General settings in Vencube (EVA 50)]]
*[[Price lists in Vencube (EVA 55)]]
*[[Time-controlled operating mode (EVA 14)]]
*[[Vensells CL Settings (EVA 15)]]
|-
! colspan="2" style="color:white; background-color:#575757; width: 30em; height: 30px;" |Sielaff Redbox
! colspan="2" style="color:white; background-color:#575757; width: 30em; height: 30px;" |
! colspan="2" style="color:white; background-color:#575757; width: 30em; height: 30px;" |Accessories and Spare parts
|-
| colspan="2" style="background-color:#eeeeee; width:30em" valign="top" |
'''instructions:''' 
*[[MDB tracing with the Sielaff Redbox]]
| colspan="2" style="background-color:#eeeeee;" valign="top" |

| colspan="2" style="background-color:#eeeeee;" valign="top" |
*[[Accessories and spare parts|Accessories]]
*[[Accessories and spare parts|Spare parts]]
|}

[[Category:Index]]
[[Category:Azkoyen]]
[[Category:Bianchi]]
[[Category:Braumann]]
[[Category:Crane]]
[[Category:Assistance]]
[[Category:EVOCA Group]]
[[Category:Instructions]]
[[Category:Jofemar]]
[[Category:Klix]]
[[Category:Lavazza Professional]]
[[Category:N&W]]
[[Category:Necta]]
[[Category:OPUS]]
[[Category:Payment systems]]
[[Category:Rheavendors Group]]
[[Category:Saeco]]
[[Category:Sielaff]]
[[Category:Trautwein]]
[[Category:Vendo]]
[[Category:Vencube alpha]]
[[Category:Vencube beta]]
[[Category:Vensoft]]
[[Category:Vensells CL]]
[[Category:Vensells OL]]
[[Category:Ventool]]
[[Category:Wittenborg]]
[[Category:Wurlitzer]]