BevMax4: Unterschied zwischen den Versionen

Aus Vensolutions
Zur Navigation springen Zur Suche springen
VisuellWikitext
Keine Bearbeitungszusammenfassung
 
(15 dazwischenliegende Versionen von 4 Benutzern werden nicht angezeigt)
Zeile 1: Zeile 1:
{| class="wikitable"
== Installation instructions ==
|-
! Automatentyp
! Schnittstelle
! Türschalter   
! Halterung Türschalter   
! Anschlußkabel     
! Anschlagwinkel     
! Befestigung Vencube
! Downloads
|-
| BevMax4
| MDB             
| Art.Nr.: XXX
Beschreibung
| Art.Nr.: XXX
Beschreibung
| Art.Nr.: XXX
Beschreibung
| Art.Nr.: XXX
Beschreibung
| Test: XXX
Beschreibung
| HEX/DEZ Umrechnung Anwahlen
[[http://wiki.vensoft.de/index.php?title=Datei:BEV_MAX_4_Umrechnung_HEX_DEZ.xlsx]] 
|}
{| class="wikitable"
|-
| '''Ansicht 1'''<br/>
[[Datei:BevMax4.jpg|200px|thumb|left|(BevMax4) bei geöffneter Tür]] 
| '''Ansicht 2'''<br/>
[[Datei:dummy.jpg|200px|thumb|left|Freier Text]] 
| '''Ansicht 3'''<br/>
[[Datei:dummy.jpg|200px|thumb|left|Freier Text]] 
| '''Ansicht 4'''<br/>
[[Datei:dummy.jpg|200px|thumb|left|Freier Text]] 


|}
{{Vorlage:Bedienungsanleitung Vencube beta}}
{| class="wikitable"
|-
'''Sonstige Bemerkungen'''
|-
| Softwarestand Automat: xxx
Hinweis: Anwahlen am Automaten müssen nicht DEZ/HEX konvertiert werden.<br/>
Anwahl zählt von links oben 1-9 (1 Reihe)<br/>
Anwahl zählt von links oben 10-18 (2 Reihe)<br/>
usw.


{{Vorlage:Vencube Montage und Inbetriebnahme}}


== Settings ==


{|
| style="vertical-align:top; width:40em"|
*Selections on the machine do not have to be converted to DEZ/HEX.<br/>
**Selection counts from top left 1-9 (1 row)<br/>
**Selection counts from top left 10-18 (2 rows)<br/>
**etc.
| style="vertical-align:top"|
[[Datei:BevMax4.jpg|200px|thumb|left|(BevMax4) with open door]] 
|}
|}
{| class="wikitable"
! Verbauter Vencube
|-
| [[Datei:beta.jpg|200px|thumb|left|Modell - beta]] 
|-


[[Kategorie:Index]]
[[Kategorie:Index]]
[[Kategorie:Crane]]
[[Kategorie:Crane]]

Aktuelle Version vom 12. März 2025, 08:36 Uhr

Installation instructions

File User manual Vencube beta currently only in German
Download link BA_Vencube_beta_032020.pdf

Vencube assembly and commissioning

Mount the Vencube

The device is assembled by the customer.
Proceed as follows during assembly:

  • Open the machine.
  • Turn off the power to the machine.
  • Determine the optimal installation position:
    Place the VENCUBE as close as possible to the machine controls and payment systems.
    Make sure that the controls are easily accessible.
    Note the cable length.
  • Glue the base plate (holder) and screw it. (Image 1)

If gluing is not possible, the assembly click holder must be screwed diagonally to the designated points in the machine with at least 2 screws1). The screw heads must be complete Sit flush and must not protrude.
1) Hardened countersunk self-drilling screw, ∅ 3.5 according to DIN 7504

  • Clip the VENCUBE into the base plate. (Image 2)
  • Remove the machine controls cover.

The machine must be voltage-free!

  • Disconnect all existing payment systems (1, 2) from the machine control. (Image 3)
  • Connect the cables from the VENCUBE:
  • Connect the (MDB) master connection (3) from the VENCUBE to the vending machine control. (Image 4)
  • Connect the (MDB) slave port (4) to all existing payment systems (5). If necessary, use a Y-cable. (Image 5)
  • If possible, glue the antenna (6) behind a plastic cover. (Image 6)
  • Route the antenna cable.
  • Lay all cables professionally with cable ties.

Never use the existing door switch of the machine, this can destroy the Vencube.

Always connect the door switch as closer to plug 1 with the Vencube.
Use connector "COM" and connector "NO" from the switch.

Image 1
Image 3
Image 5
Image 2
Image 4
Image 6

Vencube Commissioning

  • Turn on the machine.
  • If necessary, adjust the Vencube using the Ventool.
  • If necessary, configure the machine control and the payment systems.
    You can find information on this in the wiki!
  • Wait until both LEDs turn green.
  • Close the door.
  • Test the machine by making a trial vend with change.
  • Open the door again.
  • Enter the data for VENSOFT (serial number, machine number).
  • Perform a cash withdrawal by pressing the “E” button on the Vencube until you hear a beep.
  • Close the door.
  • Commissioning is complete.

Settings

  • Selections on the machine do not have to be converted to DEZ/HEX.
    • Selection counts from top left 1-9 (1 row)
    • Selection counts from top left 10-18 (2 rows)
    • etc.
(BevMax4) with open door
Abgerufen von „https://wiki.vensoft.de/en/index.php?title=BevMax4&oldid=5535“