VenCube erzeugt tickende Geräusche

Coinco Global

• VenCube erzeugt tickende Geräusche mit einem Coinco Global

Coges Aeterna

• VenCube erzeugt tickende Geräusche mit einem Coges Aterna

mei CF 690

image	root cause	rectification
	MDB level from coin changer is not level 3	The coin changer must be converted to MDB Level 3 with all extras: Hold the "Yellow button" on the coin validator for two seconds until Prices appears on the display. Use the "B button" (press once) to go to Settings and confirm with the "A button" . Now the display shows MDB Config.: Active and by pressing the '"A-key" again MDB Version is called up. The display continues to scroll and pressing the "A button" again shows (level). There are three settings: Change with the 'B-key'! - Level 2 - Level 3 No Extras - Level 3 All extras. Select the setting MDB Level 3 All Extras and confirm with the '"A-Key". Exit the settings menu by pressing the "yellow button". If the VenCube is still ticking, the vending machine must be switched off once. Please wait a few seconds before switching it on again. Attention: There are 2x MDB Level 3, please note the running text in the display.

mei CF 7400

image	root cause	rectification
	MDB level from coin changer is not level 3	The CF7400 cannot be switched in the field. In this case, the coinchanger must be replaced.

mei CF 7900

image	root cause	rectification
	MDB level from coin changer is not level 3	Setting Press and hold the yellow button on the coin validator for 3 seconds until Prices is shown on the display. Press the D button 3x until Automation Options appears on the display. Press yellow button 1x for MDB Options and press yellow button again for Change. optimal.. Press the D button once for Level and confirm with the yellow button. Then press the D button until Level 3 is displayed and confirm with yellow. Now press the C button until you exit the menu. Then restart the vending machine. Please wait a few seconds before turning it back on.

mei CF 8xxx

image	root cause	rectification
	MDB level from coin changer is not level 3	The level 3 setting applies to all four variants of the 8000 series. CF 8200 CF 8250 CF 8500 CF 8550 Setting Press and hold the yellow button on the coin validator for 3 seconds until Prices is shown on the display. Press the D button 3x until Automation Options appears on the display. Press yellow button 1x for MDB Options and press yellow button again for Change. optimal.. Press the D button once until Level is displayed. Select Level menu with yellow and select Level 3 using the D or E button and confirm with yellow. Then press the C button until you exit the menu. Then restart the vending machine. Please wait a few seconds before turning it back on.

NRI Currenza C²

• VenCube erzeugt tickende Geräusche mit einem NRI Currenza C²

SuzHapp Currenza C²

• VenCube erzeugt tickende Geräusche mit einem SuzoHapp Currenza C²