Vorlagenübersicht

Vorlagen für CPI/MEI

mei CF 690 VenCube erzeugt tickende Geräusche

Vorlage:mei CF 690 VenCube erzeugt tickende Geräusche

image	root cause	rectification
	MDB level from coin changer is not level 3	The coin changer must be converted to MDB Level 3 with all extras: Hold the "Yellow button" on the coin validator for two seconds until Prices appears on the display. Use the "B button" (press once) to go to Settings and confirm with the "A button" . Now the display shows MDB Config.: Active and by pressing the '"A-key" again MDB Version is called up. The display continues to scroll and pressing the "A button" again shows (level). There are three settings: Change with the 'B-key'! - Level 2 - Level 3 No Extras - Level 3 All extras. Select the setting MDB Level 3 All Extras and confirm with the '"A-Key". Exit the settings menu by pressing the "yellow button". If the VenCube is still ticking, the vending machine must be switched off once. Please wait a few seconds before switching it on again. Attention: There are 2x MDB Level 3, please note the running text in the display.

Vorlagen für Sielaff

Hinweis erhöter Datenaustausch

Vorlage:Hinweis erhöter Datenaustausch

After the VMC is switched on for the first time with the Vencube connected, there is increased data exchange between the controller and the Vencube. As a result, the VMC cannot be operated for up to ten minutes, or only very slowly, and coin acceptance and payout can be disrupted at the same time. After the waiting time, the machine will work again without any problems.

Hinweis Patchmenü Sielaff

Vorlage:Hinweis Patchmenü Sielaff
Make the following settings in the patch menu and check them in the installation menu and make additional settings there if necessary.

The patch menu is reached via the service menu (M-8-E) by entering 99M 55M.

Settings in the patch menu M - 8 - E 99M 55M setting option ALT.PAYOUT enabled TUBECOUNT Coin Mech contr. MIXED PAYMENT allowed MDB-comp.mode B.Pract. SAVE SETTINGS yes After pressing the "E" key "done" stands for confirmation in the display!

Settings in the installation menu M - 7 - E setting option CRED. CONFIG. MAN.CONFIG. TUBE COUNT by COINMECH ALT.PAYOUT on MIXED PAYM. on MIXED PAYM.PRICE cash price MDB-comp.mode b. practice

Vorlagen für Vendo

Hinweis Vendo Cashless Preise Einstellen

Vorlage:Hinweis Vendo Cashless Preise Einstellen
Vorlage:Hinweis Vendo Cashless Preise Einstellen

Vorlagen für Türschalter

Hinweis vorhandener Türschalter

Vorlage:Hinweis vorhandener Türschalter

Never use the existing door switch of the machine, this can destroy the Vencube.

Hinweis Türschalter als Schließer

Vorlage:Hinweis Türschalter als Schließer

Always connect the door switch as closer to plug 1 with the Vencube. Use connector "COM" and connector "NO" from the switch.