GF99 Combimat

Zurück zur Sielaffübersicht

Einbauanleitung

Türschalter	Halterung Türschalter	Anschlußkabel	Anschlagwinkel	Befestigung Vencube
Art.Nr.:22-0745 Doorswitch Cherry 6.3mm Push/pull	Art.Nr.:33-3000-00 Halterung Türschalter 90°	Art. Nr.: VTC-X5-IO1-300 Anschlußkabel Türschalter 3000mm	nicht erforderlich	Verklebt

File	User manual Vencube beta currently only in German
Download link	BA_Vencube_beta_032020.pdf

VenCube möglichst in der Nähe der Automatensteuerung und den Zahlungssystemen platzieren. Bodenplatte im Automaten verkleben, oder verschrauben. Fals die Bodenplatte Verklebt wird, bitte ohne Vencube die Bodenplatte fest andrücken. Automat spannungsfrei schalten und alle vorhandenen Zahlungssysteme von der Automatensteuerung trennen. MDB-Master Anschluss vom VenCube mit der Steuerung verbinden. MDB-Slave Anschluss mit allen vorhandenen Zahlungssystemen verbinden. Für zusätzliche MDB-Slave Anschlüsse sollten Y-Kabel genutzt werden. Türschalter einbauen. Never use the existing door switch of the machine, this can destroy the Vencube. Always connect the door switch as closer to plug 1 with the Vencube. Use connector "COM" and connector "NO" from the switch.

Einbauposition VenCube Türschalter Winkel Türschalter Winkel mit Schalter

Türschalter Winkel eingebaut Türschalter Winkel verschraubt

Erstinbetriebnahme

After the VMC is switched on for the first time with the Vencube connected, there is increased data exchange between the controller and the Vencube. As a result, the VMC cannot be operated for up to ten minutes, or only very slowly, and coin acceptance and payout can be disrupted at the same time. After the waiting time, the machine will work again without any problems.

Einstellungen der Steuerung

Anwahlen im Cashlesmenü einstellen auf "Hex Format", dann sind Anwahlen gleich dem Produktcode

Auster SUE

Make the following settings in the patch menu and check them in the installation menu and make additional settings there if necessary.

The patch menu is reached via the service menu (M-8-E) by entering 99M 55M.

Settings in the patch menu M - 8 - E 99M 55M Settings Options ALT.PAYOUT enabled TUBECOUNT COIN MECH contr. MIXED PAYMENT allowed MDB-comp.mode B.Pract. SAVE SETTINGS yes After pressing the "E" key "done" stands for confirmation in the display!

Settings in the installation menu M - 7 - E Settings Options > CREDIT SYSTEM CRED. CONFIG. MAN.CONFIG. > COIN MECHANISM TUBE COUNT by COINMECH ALT. PAYOUT on TUBES EMPTY INFO A > CARD READER MIXED PAYM. on MIXED PAYM.PRICE cash price MDB-comp.mode Best Practice MDB ITEM NUMBERS Hexadezimal

Note: The previously made settings must be checked again after a software update of the VMC.

Softwarestand / FTL

Anzeige des Softwarestandes im Servicemenü: M - 8 - E - 21 - L

Was steckt hinter der Softwarebezeichnung?

Software	Patchmenü	FTL geeignet

Steuerung Auster SUE M32

Make the following settings in the patch menu and check them in the installation menu and make additional settings there if necessary.

The patch menu is reached via the service menu (M-8-E) by entering 99M 55M.

Settings in the patch menu M - 8 - E 99M 55M Settings Options ALT.PAYOUT enabled TUBECOUNT COIN MECH contr. MIXED PAYMENT allowed MDB-comp.mode B.Pract. SAVE SETTINGS yes After pressing the "E" key "done" stands for confirmation in the display!

Settings in the installation menu M - 7 - E Settings Options > CREDIT SYSTEM CRED. CONFIG. MAN.CONFIG. > COIN MECHANISM TUBE COUNT by COINMECH ALT. PAYOUT on TUBES EMPTY INFO A > CARD READER MIXED PAYM. on MIXED PAYM.PRICE cash price MDB-comp.mode Best Practice MDB ITEM NUMBERS Hexadezimal

Note: The previously made settings must be checked again after a software update of the VMC.

Softwarestand / FTL

Anzeige des Softwarestandes im Servicemenü: M - 8 - E - 21 - L

Was steckt hinter der Softwarebezeichnung?

Software	Patchmenü	FTL geeignet

Steuerung Auster HG M32

Make the following settings in the patch menu and check them in the installation menu and make additional settings there if necessary.

The patch menu is reached via the service menu (M-8-E) by entering 99M 55M.

Settings in the patch menu M - 8 - E 99M 55M Settings Options ALT.PAYOUT enabled TUBECOUNT COIN MECH contr. MIXED PAYMENT allowed MDB-comp.mode B.Pract. SAVE SETTINGS yes After pressing the "E" key "done" stands for confirmation in the display!

Settings in the installation menu M - 7 - E Settings Options > CREDIT SYSTEM CRED. CONFIG. MAN.CONFIG. > COIN MECHANISM TUBE COUNT by COINMECH ALT. PAYOUT on TUBES EMPTY INFO A > CARD READER MIXED PAYM. on MIXED PAYM.PRICE cash price MDB-comp.mode Best Practice MDB ITEM NUMBERS Hexadezimal

Note: The previously made settings must be checked again after a software update of the VMC.

Softwarestand / FTL

Anzeige des Softwarestandes im Servicemenü: M - 8 - E - 21 - L

Was steckt hinter der Softwarebezeichnung?

Software	Patchmenü	FTL geeignet

Problemlösungen

Übersicht der Problemlösungen

• Bei Sielaff Automaten erscheint „Bitte Warten“ im Automaten Display und es ist kein Verkauf möglich.
• Der Automat gibt kein Wechselgeld aus.
• Keine Münzannahme und keine Wechselgeld Ausgabe bei Sielaff Automaten.