VenCube erzeugt tickende Geräusche

Coinco Global

image	root cause	rectification
	MDB level from coin changer is not level 3	The coin changer must be converted to MDB Level 3 with all extras: Hold the "Yellow button" on the coin validator for two seconds until `Prices` appears on the display. Use the "B button" (press once) to go to `Settings` and confirm with the "A button" . Now the display shows `MDB Config.: Active` and by pressing the '"A-key" again MDB Version is called up. The display continues to scroll and pressing the "A button" again shows (level). There are three settings: Change with the 'B-key'! - Level 2 - Level 3 No Extras - Level 3 All extras. Select the setting MDB Level 3 All Extras and confirm with the '"A-Key". Exit the settings menu by pressing the "yellow button". If the VenCube is still ticking, the vending machine must be switched off once. Please wait a few seconds before switching it on again. Attention: There are 2x MDB Level 3, please note the running text in the display.

image	root cause	rectification
	MDB level from coin changer is not level 3	The CF7400 cannot be switched in the field. In this case, the coinchanger must be replaced.

image	root cause	rectification
	MDB level from coin changer is not level 3	Setting Press and hold the yellow button on the coin validator for 3 seconds until `Prices` is shown on the display. Press the D button 3x until `Automation Options` appears on the display. Press yellow button 1x for `MDB Options` and press yellow button again for `Change. optimal.`. Press the D button once for `Level` and confirm with the yellow button. Then press the D button until `Level 3` is displayed and confirm with yellow. Now press the C button until you exit the menu. Then restart the vending machine. Please wait a few seconds before turning it back on.

image	root cause	rectification
	MDB level from coin changer is not level 3	The level 3 setting applies to all four variants of the 8000 series. CF 8200 CF 8250 CF 8500 CF 8550 Setting Press and hold the yellow button on the coin validator for 3 seconds until `Prices` is shown on the display. Press the D button 3x until `Automation Options` appears on the display. Press yellow button 1x for `MDB Options` and press yellow button again for `Change. optimal.`. Press the D button once until `Level` is displayed. Select `Level menu` with yellow and select `Level 3` using the D or E button and confirm with yellow. Then press the C button until you exit the menu. Then restart the vending machine. Please wait a few seconds before turning it back on.