Back to Sielaff overview
Initial commissioning
|
After the VMC is switched on for the first time with the Vencube connected, there is increased data exchange between the controller and the Vencube. As a result, the VMC cannot be operated for up to ten minutes, or only very slowly, and coin acceptance and payout can be disrupted at the same time. After the waiting time, the machine will work again without any problems.
|
VMC settings
VMC Auster HG 2540
|
|
Note:
These VMC all have MDB interfaces, the Vencube should therefore also be operated directly via MDB without adapter boards or cable harnesses and not via BDV master cable. Depending on which cashless payment system is connected to the Vencube, a BDV or MDB slave cable is to be used here. For coin changers and bill readers, always MDB is preferable.
|
|
|
Note:
Depending on the type of VMC and the software version of the VMC, not all setting options may be available, and the points that are not available can then be skipped. It may also be possible that the setting items have a German or English name, or that the texts are displayed somewhat differently.
|
Make the following settings in the patch menu and check them in the installation menu and make additional settings there if necessary.
The patch menu is reached via the service menu (M-8-E) by entering 99M 55M.
Settings in the patch menu
M - 8 - E 99M 55M
Menu structure as in
|
| Settings
|
Options
|
| ALT.PAYOUT
|
enabled
|
| TUBECOUNT
|
COIN MECH contr.
|
| MIXED PAYMENT
|
allowed
|
| MDB-comp.mode
|
B.Pract.
|
| SAVE SETTINGS
|
yes
After pressing the "E" key
"done" stands for confirmation
in the display!
|
|
|
Settings in the installation menu
M - 7 - E
Menu structure as in
|
| Settings
|
Options
|
| > CREDIT SYSTEM
|
CRED. CONFIG.
|
MAN.CONFIG.
|
| > COIN MECHANISM
|
TUBE COUNT
|
by COINMECH
|
| ALT. PAYOUT
|
on
|
| TUBES EMPTY INFO
|
A
|
| > CARD READER
|
MIXED PAYM.
|
on
|
| MIXED PAYM.PRICE
|
cash price
|
| MDB-comp.mode
|
Best Practice
|
|
|
|
Note:
The previously made settings must be checked again after a software update of the VMC.
|
Software version / FTL
Display of the software status in the service menu: M - 8 - E - 21 - L
| Software
|
Patch menu
|
FTL suitable
|
Comment
|
 |
|
|
|
VMC Auster HG M32
|
|
Note:
These VMC all have MDB interfaces, the Vencube should therefore also be operated directly via MDB without adapter boards or cable harnesses and not via BDV master cable. Depending on which cashless payment system is connected to the Vencube, a BDV or MDB slave cable is to be used here. For coin changers and bill readers, always MDB is preferable.
|
|
|
Note:
Depending on the type of VMC and the software version of the VMC, not all setting options may be available, and the points that are not available can then be skipped. It may also be possible that the setting items have a German or English name, or that the texts are displayed somewhat differently.
|
Make the following settings in the patch menu and check them in the installation menu and make additional settings there if necessary.
The patch menu is reached via the service menu (M-8-E) by entering 99M 55M.
Settings in the patch menu
M - 8 - E 99M 55M
Menu structure as in
|
| Settings
|
Options
|
| ALT.PAYOUT
|
enabled
|
| TUBECOUNT
|
COIN MECH contr.
|
| MIXED PAYMENT
|
allowed
|
| MDB-comp.mode
|
B.Pract.
|
| SAVE SETTINGS
|
yes
After pressing the "E" key
"done" stands for confirmation
in the display!
|
|
|
Settings in the installation menu
M - 7 - E
Menu structure as in
|
| Settings
|
Options
|
| > CREDIT SYSTEM
|
CRED. CONFIG.
|
MAN.CONFIG.
|
| > COIN MECHANISM
|
TUBE COUNT
|
by COINMECH
|
| ALT. PAYOUT
|
on
|
| TUBES EMPTY INFO
|
A
|
| > CARD READER
|
MIXED PAYM.
|
on
|
| MIXED PAYM.PRICE
|
cash price
|
| MDB-comp.mode
|
Best Practice
|
|
|
|
Note:
The previously made settings must be checked again after a software update of the VMC.
|
Software version / FTL
Display of the software status in the service menu: M - 8 - E - 21 - L
| Software
|
Patch menu
|
FTL suitable
|
Comment
|
|
|
|
|
Kreditanzeige bei Münzeinwurf sehr träge
|
|
Credit display very sluggish when inserting coins:
- Under: Menu ⇒ Installation ⇒ Deactivate card system 2
- Under: Menu ⇒ Installation ⇒ Special setting C,
set the MDB polling rate to 100ms or 50ms!
|
|
Adjust the MDB polling rate only in selected individual cases!
There may be problems with the display!
|
|
The table shows the bit mask for the desired settings, please set appropriately.
| 01
|
For cold water products, the cup price becomes 0.00
|
| 02
|
IR readout/configuration only active when entered in the menu level (no menu selected)
|
| 04
|
Output all error messages in clear text
|
| 08
|
pressure cell old (0.5 .. 4.5V
|
| 16
|
Water shortage detection deactivated via the measuring turbine (espresso machines)
|
| 32
|
BARISTA: When the milk cleaning time (Def. = 36h) is reached, the milk products are not taken out of service.
|
| 64
|
Reduce MDB polling rate to 100ms
|
| 128
|
Shorten MDB polling rate to 50ms, gains over 64
|
|
Problem solving
Troubleshooting Overview
