Token

Aus Vensolutions
Zur Navigation springen Zur Suche springen

Activate token acceptance in coin changer

CPI

CPI Gryphon

Picture Teach token Release token
CPI Gryphon Münzwechsler
Teach token
  1. Press the Menu button.
  2. Press the E button (Settings).
  3. Press the F button to advance to the next menu.
  4. Press the A button to access the coin configuration.
  5. Press the A button again (teach token).
  6. Select the token position (teach 1) of the token to be set and press OK (F button).
  7. Select the token type of the token to be set (sales token) and press OK (F button).
  8. Select the token name of the token to be set (teach 1) and press OK (F button).
  9. Select the acceptance tolerance of the token to be set (Normal/Wide) and press OK (F button).
  10. Token Insertion 0/32 appears on the display.
  11. Insert the token to be taught 32 times (32 different).
  12. Press the F key to save.
  13. "Successful" must appear on the display.
  14. If you navigate back to the main menu using the Menu key, the changer will restart automatically.

CPI / MEI

MEI CF 690

Picture Teach token Release token
Cashflow 690 Münzwechsler Token cannot be programmed on-site; this is only possible in a service workshop!
Release pre-programmed token
  1. Press the yellow mode button
  2. Press the B button
  3. Insert the token
  4. Press the yellow mode button
  5. The token is now released.

MEI CF 7400

Picture Teach token Release token
Cashflow 7400 Münzwechsler Token cannot be programmed on-site; this is only possible in a service workshop!
How to identify a pre-programmed token

You can easily find out if your token is pre-programmed by inserting the token and observing the LED. The token will be rejected, but the LED will indicate whether it is in the token program.

Insert token into the coin changer
The LED flashes three times: ✔✔✔
The token is recognized and can be released.
The LED flashes twice: ✔✔
The token is not in memory and cannot be accepted.
Release Token
  1. Press the Mode button (yellow), the green LED flashes slowly.
  2. Press the B button, the green LED flashes faster.
  3. Insert the token, the green LED is on but not flashing.
  4. Wait 3 seconds.
  5. Press the Mode button (yellow) three times, not too quickly in succession (1 second pause).
  6. Afterward, the LED should return to normal light (no flashing).
  7. After restarting the machine, the token should be accepted as a vending token.

MEI CF 7900

Picture Teach token Release token
Cashflow 7900 Münzwechsler
Release Token
  1. Press the Menu button (yellow).
  2. Press the Coin Set button (B button).
  3. Insert the token.
  4. Wait 3 seconds.
  5. Press the OK button (yellow); the display will show "Vend Token".
  6. Press the OK button (yellow); the display will show "Accept".
  7. Press the End button (yellow).
  8. After restarting the machine, the token should be accepted as a vend token.

MEI CF 8000

Picture Teach token Release token
Cashflow 8200 Münzwechsler
Release Token
  1. Press the Menu button (yellow).
  2. Press the Coin Set button (B button).
  3. Insert the token.
  4. Wait 3 seconds.
  5. Press the OK button (yellow); the display will show "Vend Token".
  6. Press the OK button (yellow); the display will show "Accept".
  7. Press the End button (yellow).
  8. After restarting the machine, the token should be accepted as a vend token.

CPI / NRI

NRI G46

Picture Teach token Release token
NRI G46 Münzwechsler Token cannot be programmed on-site; this is only possible in a service workshop! Tokens cannot be released on-site; this is only possible in a service workshop!

NRI E 66

Picture Teach token Release token
NRI E66 Münzwechsler Token cannot be programmed on-site; this is only possible in a service workshop! Tokens cannot be released on-site; this is only possible in a service workshop!

NRI C²

Picture Teach token Release token
NRI Currenza C² Münzwechsler
Teach token
  1. Press the Menu button.
  2. Press the Service button (C button).
  3. Press the B button twice to access "Token Teach".
  4. Press the OK button (E button).
  5. Press the OK button (E button) again. Three freely configurable tokens (A, B, and C) will appear on the display.
  6. Select the token to be configured and press the OK button (E button).
  7. Insert the token to be taught at least 10 times (ten different ones).
  8. Confirm with the OK button (E button).
  9. Select the desired acceptance tolerance (A = normal, B = wide).
  10. "Token successfully programmed" must appear on the display.
  11. For the token to be accepted as a sales token, the token value for the token to be programmed must be set to 0.00.
    ⇒ Menu button
    ⇒ Set (E button)
    ⇒Coin processing (E button)
    ⇒Set coin value (E button)
  12. After restarting the machine, the token should be accepted.
Release token
  1. Press the Menu button.
  2. Press Set (E button).
  3. Press the B button once and then press Lock Masks (E button).
  4. Use the A button (up) and the B button (down) to select the channel in which the token is programmed (Channel 7 = Token A; Channel 8 = Token B; Channel 9 = Token C).
  5. Press the OK button (E button).
  6. Use the arrow keys (A and B buttons) to change "locked" to "unlocked."
  7. Confirm with OK (E button). Return to the beginning by pressing the Menu button (or Exit/F button) several times.
  8. After restarting the machine, the token should be accepted as a vending token.

SuzoHapp

SuzoHapp C²

Picture Teach token Release token
NRI Currenza C² Münzwechsler
Teach token
  1. Press the Menu button.
  2. Press the Service button (C button).
  3. Press the B button twice to access "Token Teach".
  4. Press the OK button (E button).
  5. Press the OK button (E button) again. Three freely configurable tokens (A, B, and C) will appear on the display.
  6. Select the token to be configured and press the OK button (E button).
  7. Insert the token to be taught at least 10 times (ten different ones).
  8. Confirm with the OK button (E button).
  9. Select the desired acceptance tolerance (A = normal, B = wide).
  10. "Token successfully programmed" must appear on the display.
  11. For the token to be accepted as a sales token, the token value for the token to be programmed must be set to 0.00.
    ⇒ Menu button
    →Set (E button)
    ⇒Coin processing (E button)
    ⇒Set coin value (E button)
  12. After restarting the machine, the token should be accepted.
Release token
  1. Press the Menu button.
  2. Press Set (E button).
  3. Press the B button once and then press Lock Masks (E button).
  4. Use the A button (up) and the B button (down) to select the channel in which the token is programmed (Channel 7 = Token A; Channel 8 = Token B; Channel 9 = Token C).
  5. Press the OK button (E button).
  6. Use the arrow keys (A and B buttons) to change "locked" to "unlocked."
  7. Confirm with OK (E button). Return to the beginning by pressing the Menu button (or Exit/F button) several times.
  8. After restarting the machine, the token should be accepted as a vending token.

Coinco

Coinco Global

Picture Teach token Release token
Coinco Global Münzwechsler
Abgerufen von „https://wiki.vensoft.de/en/index.php?title=Token&oldid=5796“