- Place Vencube as close as possible to the vending machine control and payment systems.
- Glue or screw the base plate into the machine. If the base plate is glued, please press it firmly into place without the Vencube.
- Power down the machine and disconnect all existing payment systems from the vending machine control.
- Connect the MDB master port from the VenCube to the vending machine control.
- Connect the MDB slave port to all existing payment systems. Y-cables should be used for additional MDB slave connections.
- Install door switch.
|
Never use the existing door switch of the machine, this can destroy the Vencube.
|
|
Always connect the door switch as closer to plug 1 with the Vencube.
Use connector "COM" and connector "NO" from the switch.
|
|
