G-Drink: Unterschied zwischen den Versionen

Aus Vensolutions
Zur Navigation springen Zur Suche springen
VisuellWikitext
Keine Bearbeitungszusammenfassung
 
(6 dazwischenliegende Versionen von einem anderen Benutzer werden nicht angezeigt)
Zeile 1: Zeile 1:
== Einbauanleitung ==
== Installation instructions ==
 
{{Vorlage:Bedienungsanleitung Vencube beta}}
 
{{Vorlage:Vencube Montage und Inbetriebnahme}}


{| class="wikitable"
|-
| Türschalter
! Halterung Türschalter
! Anschlußkabel
! Anschlagwinkel
! Befestigung Vencube
|-
| Art.Nr.:22-0745
Doorswitch Cherry 6.3mm Push/pull 
| Art. Nr.: 33-5000-00
Halterung Türschalter 90°
| Art. Nr.: VTC-X5-IO1-300
Anschlußkabel Türschalter 3000mm
| nicht erforderlich
| Verklebt
|}


{|
{|
| style="vertical-align:top; width:40em"|
*VenCube möglichst in der Nähe der Automatensteuerung und den Zahlungssystemen platzieren.
*Bodenplatte im Automaten verkleben, oder verschrauben. Fals die Bodenplatte Verklebt wird, bitte ohne Vencube die Bodenplatte fest andrücken.
*Automat spannungsfrei schalten und alle vorhandenen Zahlungssysteme von der Automatensteuerung trennen.
*MDB-Master Anschluss vom VenCube mit der Steuerung verbinden.
*MDB-Slave Anschluss mit allen vorhandenen Zahlungssystemen verbinden. Für zusätzliche MDB-Slave Anschlüsse sollten Y-Kabel genutzt werden.
*Türschalter einbauen.
{{Vorlage:Hinweis vorhandener Türschalter}}
{{Vorlage:Hinweis Türschalter als Schließer}}
| style="vertical-align:top"|
| style="vertical-align:top"|
[[Datei:einbaulage Vencube klein.jpg|200px|thumb|left|Tür innen mit Türschalter]]   
{{Vorlage:Hinweis Türschalter Installation}}
| style="vertical-align:top"|
[[Datei:einbaulage Vencube klein.jpg|200px|thumb|left|Door inside with door switch]]   
| style="vertical-align:top"|
| style="vertical-align:top"|
[[Datei:Türschalter klein.jpg|200px|thumb|left|Tür innen]]
[[Datei:Türschalter klein.jpg|200px|thumb|left|Door inside]]
|}
|}


== Softwarestand der Steuerung ==
== Machine control board SF01 ==


== Einstellungen der Steuerung ==
=== Software status of the machine control ===


=== Einstellung der Preise ===
=== Machine control settings ===


Die Verkaufspreise müssen bei den Barpreisen und bei den Kartenpreisen (Cashless Preise) gleich eingestellt werden.
==== Adjustment of prices ====


=== Einstellung der Anzeige "Kein Wechselgeld" ===
The sales prices must be set the same for the cash prices and for the card prices(cashless prices).


==== Steuerplatine SF01 ====
===== Setting the "No Change" Indicator =====


Im Menüpunkt "CONFY" für die Kundenspezifische Einstellung unter "C2" für die Tubenbestimmung der Meldung: "Nur abgezähltes Geld einwerfen" die Einstellung anpassen.
Adjust the setting in the "CONFY" menu item for the customer-specific setting under "C2" for determining the tube of the message: "Insert counted money only".


;MDB MODUS
;MDB MODE
::Sind die hier ausgewählten Tuben leer wird "Nur abgezähltes Geld einwerfen" angezeigt.
::If the tubes selected here are empty, "Insert only counted money" will be displayed.
::A = Tube mit kleinstem Münzwert
::A = tube with the smallest coin denomination
::D = Tube mit höchstem Münzwert
::D = Tube with the highest coin value


Sind die Tuben entsprechend den folgende Konfigurationen leer wird die Anzeige
If the tubes are empty according to the following configurations, the display will
"Abgezähltes Geld" eingeschaltet
"Counted money" switched on


{| class="wikitable mw-datatable" style="text-align:center" width="40%" border="1"
{| class="wikitable mw-datatable" style="text-align:center" width="40%" border="1"
|-
|-
! width=" 5%" | Wert
! width=" 5%" | value
! width="35%" | Funktion
! width="35%" | function
|-
|-
| 0 || Tube A und Tube B und Tube C und Tube D
| 0 || Tube A and Tube B and Tube C and Tube D
|-
|-
| 1 || Tube A oder Tube B oder Tube C
| 1 || Tube A or Tube B or Tube C
|-
|-
| 2 || Tube A
| 2 || Tube A
|-
|-
| 3 || Tube B
| 3 || Tube B
|-
|-
| 4 || Tube C
| 4 || Tube C
|-
|-
| 5 || Tube D
| 5 || Tube D
|-
|-
| 6 || Tube B oder C oder D
| 6 || Tube B or C or D
|-
|-
| 7 || Tube A und Tube B oder Tube C
| 7 || Tube A and Tube B or Tube C
|-
|-
| 8 || Tube A und Tube B oder Tube D
| 8 || Tube A and Tube B or Tube D
|-
|-
| 9 || Tube A und Tube C oder Tube D
| 9 || Tube A and Tube C or Tube D
|-
|-
| 10 || Tube B und Tube C oder Tube D
| 10 || Tube B and Tube C or Tube D
|-
|-
| 11 || Tube A und Tube D oder Tube C
| 11 || Tube A and Tube D or Tube C
|-
|-
| 12 || Tube B und Tube D oder Tube A
| 12 || Tube B and Tube D or Tube A
|-
|-
| 13 || Tube A oder Tube C
| 13 || Tube A or Tube C
|-
|-
| 14 || Tube A oder Tube B und Tube C
| 14 || Tube A or Tube B and Tube C
|-
|-
| 15 || Tube A oder Tube B
| 15 || Tube A or Tube B
|}
|}


Nach Eingabe der Konfigurations-Nummer Einstellung mit Taste 4 speichern
After entering the configuration number, save the setting with button 4
 
Set the number of coins in menu item "C03" level for display "Insert counted money only". When the number of coins set here (1 to 10) is reached, the display "Insert counted money only" is switched on. Ideally, 10 coins should be set here.
 
== Machine control board SEV01 ==
 
=== Software status of the machine control ===
 
=== Machine control settings ===
 
==== Adjustment of prices ====
 
The sales prices must be set the same for the cash prices and for the card prices (cashless prices).


Im Menüpunkt "C03" Niveau für Anzeige "Nur abgezähltes Geld einwerfen" die Anzahl der Münzen einstellen. Bei Erreichen der hier eingestellten Münzanzahl (1 bis 10) wird die Anzeige "Nur abgezähltes Geld einwerfen" eingeschaltet. Idealerweise sollte hier 10 Münzen eingestellt sein.
==== No change display setting ====


==== Steuerplatine SEV01 ====
In the settings menu '''4.1.2.7 "Value for display only cash"''' set to the same value as in Vencube under [[VenToolWin#Program interface:_Coin changer_/_Bank note reader|Limit "No change"]].< br>
If the condition of the change is not met, “ENTER EXACT CHANGE” will appear on the machine display.
Im Einstellungsmenü '''4.1.2.7 "Wert für Anzeige nur abgez. Geld"''' auf den gleichen Wert wie im Vencube unter [[VenToolWin#Programmoberfläche:_Münzwechsler_/_Banknotenleser|Grenze "Kein Wechselgeld"]] steht, einstellen.<br>
Ist die Bedingung des Wechselgelds nicht erfüllt, erscheint auf dem Display des Automaten „EXAKTES WECHSELGELD EINGEBEN“.


Diese Funktion wird nur berücksichtigt, wenn unter 4.1.2.5 der Mehrfachverkauf aktiviert ist.
This function is only taken into account if multiple sales are activated under 4.1.2.5.


== Bedienungsanleitungen des Automaten ==
== Operating instructions of the vending machine ==


{| class="wikitable mw-datatable" style="text-align:center" width="60%" border="1"
{| class="wikitable mw-datatable" style="text-align:center" width="60%" border="1"
|-
|-
! width="20%" | Steuerungstyp
! width="20%" | VMC type
! width="40%" | Bedienungsanleitung
! width="40%" | Operation manual
|-
|-
| SF01 - G-Drink
| SF01 - G-Drink
| Beispiel
| Example
|-
|-
| SVE01 - G-Drink
| SVE01 - G-Drink
| Beispiel
| Example
|}
|}


Aktuelle Version vom 12. März 2025, 14:04 Uhr

Installation instructions

File User manual Vencube beta currently only in German
Download link BA_Vencube_beta_032020.pdf

Vencube assembly and commissioning

Mount the Vencube

The device is assembled by the customer.
Proceed as follows during assembly:

  • Open the machine.
  • Turn off the power to the machine.
  • Determine the optimal installation position:
    Place the VENCUBE as close as possible to the machine controls and payment systems.
    Make sure that the controls are easily accessible.
    Note the cable length.
  • Glue the base plate (holder) and screw it. (Image 1)

If gluing is not possible, the assembly click holder must be screwed diagonally to the designated points in the machine with at least 2 screws1). The screw heads must be complete Sit flush and must not protrude.
1) Hardened countersunk self-drilling screw, ∅ 3.5 according to DIN 7504

  • Clip the VENCUBE into the base plate. (Image 2)
  • Remove the machine controls cover.

The machine must be voltage-free!

  • Disconnect all existing payment systems (1, 2) from the machine control. (Image 3)
  • Connect the cables from the VENCUBE:
  • Connect the (MDB) master connection (3) from the VENCUBE to the vending machine control. (Image 4)
  • Connect the (MDB) slave port (4) to all existing payment systems (5). If necessary, use a Y-cable. (Image 5)
  • If possible, glue the antenna (6) behind a plastic cover. (Image 6)
  • Route the antenna cable.
  • Lay all cables professionally with cable ties.

Never use the existing door switch of the machine, this can destroy the Vencube.

Always connect the door switch as closer to plug 1 with the Vencube.
Use connector "COM" and connector "NO" from the switch.

Image 1
Image 3
Image 5
Image 2
Image 4
Image 6

Vencube Commissioning

  • Turn on the machine.
  • If necessary, adjust the Vencube using the Ventool.
  • If necessary, configure the machine control and the payment systems.
    You can find information on this in the wiki!
  • Wait until both LEDs turn green.
  • Close the door.
  • Test the machine by making a trial vend with change.
  • Open the door again.
  • Enter the data for VENSOFT (serial number, machine number).
  • Perform a cash withdrawal by pressing the “E” button on the Vencube until you hear a beep.
  • Close the door.
  • Commissioning is complete.


  • Place Vencube as close as possible to the vending machine control and payment systems.
  • Glue or screw the base plate into the machine. If the base plate is glued, please press it firmly into place without the Vencube.
  • Power down the machine and disconnect all existing payment systems from the vending machine control.
  • Connect the MDB master port from the VenCube to the vending machine control.
  • Connect the MDB slave port to all existing payment systems. Y-cables should be used for additional MDB slave connections.
  • Install door switch.

Never use the existing door switch of the machine, this can destroy the Vencube.

Always connect the door switch as closer to plug 1 with the Vencube.
Use connector "COM" and connector "NO" from the switch.

Door inside with door switch
Door inside

Machine control board SF01

Software status of the machine control

Machine control settings

Adjustment of prices

The sales prices must be set the same for the cash prices and for the card prices(cashless prices).

Setting the "No Change" Indicator

Adjust the setting in the "CONFY" menu item for the customer-specific setting under "C2" for determining the tube of the message: "Insert counted money only".

MDB MODE
If the tubes selected here are empty, "Insert only counted money" will be displayed.
A = tube with the smallest coin denomination
D = Tube with the highest coin value

If the tubes are empty according to the following configurations, the display will "Counted money" switched on

value function
0 Tube A and Tube B and Tube C and Tube D
1 Tube A or Tube B or Tube C
2 Tube A
3 Tube B
4 Tube C
5 Tube D
6 Tube B or C or D
7 Tube A and Tube B or Tube C
8 Tube A and Tube B or Tube D
9 Tube A and Tube C or Tube D
10 Tube B and Tube C or Tube D
11 Tube A and Tube D or Tube C
12 Tube B and Tube D or Tube A
13 Tube A or Tube C
14 Tube A or Tube B and Tube C
15 Tube A or Tube B

After entering the configuration number, save the setting with button 4

Set the number of coins in menu item "C03" level for display "Insert counted money only". When the number of coins set here (1 to 10) is reached, the display "Insert counted money only" is switched on. Ideally, 10 coins should be set here.

Machine control board SEV01

Software status of the machine control

Machine control settings

Adjustment of prices

The sales prices must be set the same for the cash prices and for the card prices (cashless prices).

No change display setting

In the settings menu 4.1.2.7 "Value for display only cash" set to the same value as in Vencube under Limit "No change".< br> If the condition of the change is not met, “ENTER EXACT CHANGE” will appear on the machine display.

This function is only taken into account if multiple sales are activated under 4.1.2.5.

Operating instructions of the vending machine

VMC type Operation manual
SF01 - G-Drink Example
SVE01 - G-Drink Example
Abgerufen von „https://wiki.vensoft.de/en/index.php?title=G-Drink&oldid=5574“