Vencube does not broadcast

Check antenna

1. Switch off the machine and switch it on again after approx. 30 seconds.
2. If you do not dial into the network, repeat the process with the machine door wide open.
3. If necessary, check whether the antenna is correctly plugged into the VenCube.
4. If necessary, the antenna is to be exchanged.

1. Switch off the machine, unplug all VenCube cables and remove the VenCube from its holder.
2. Remove the SIM card:
   1. Using a small screwdriver, gently press in on the yellow eject button next to the SIM card. (picture 3 and 4)
   2. The SIM card can now be removed. (picture 5 and 6)
3. Clean the SIM card contacts with a cloth.
4. Insert the SIM card back into the SIM card holder and push it into the VenCube as far as it will go. (picture 7)
5. Insert the VenCube into the machine and plug in all the cables.
6. Switch the machine on again and wait until the machine dials into the mobile network.
7. If there is no network dial-up, the VenCube is faulty and should be replaced.

• 

  Remove cover (image 1)

• 

  (Image 2)

• 

  (Image 3)

• 

  (Image 4)

• 

  (Image 5)

• 

  (Image 6)

• 

  (Image 7)