SiOne: Unterschied zwischen den Versionen

Aus Vensolutions
Zur Navigation springen Zur Suche springen
VisuellWikitext
Keine Bearbeitungszusammenfassung
 
(45 dazwischenliegende Versionen von 2 Benutzern werden nicht angezeigt)
Zeile 1: Zeile 1:
Zurück zur [[Sielaff|Sielaffübersicht]]
{{Vorlage:Linkbox Automaten Sielaff}}
==Einbauanleitung==
Back to [[Sielaff|Sielaff overview]]
== Installation instructions ==
 
{{Vorlage:Bedienungsanleitung Vencube beta}}
 
{{Vorlage:Vencube Montage und Inbetriebnahme}}


{| class="wikitable"
|-
!Türschalter
!Halterung Türschalter
!Anschlußkabel
!Anschlagwinkel
!Befestigung Vencube
|-     
|Art.Nr.:22-0745
Doorswitch Cherry 6.3mm Push/pull 
|Art.Nr.:33-3000-00
Halterung Türschalter 90°   
|Art. Nr.: VTC-X5-IO1-300
Anschlußkabel Türschalter 3000mm               
|nicht erforderlich
|Verklebt
|}


{|
{|
| style="vertical-align:top; width:40em" |
| style="vertical-align:top; width:40em" |
*VenCube möglichst in der Nähe der Automatensteuerung und den Zahlungssystemen platzieren.
{{Vorlage:Hinweis Türschalter Installation}}
*Bodenplatte im Automaten verkleben, oder verschrauben. Fals die Bodenplatte Verklebt wird, bitte ohne Vencube die Bodenplatte fest andrücken.
{| class="wikitable"
*Automat spannungsfrei schalten und alle vorhandenen Zahlungssysteme von der Automatensteuerung trennen.
| [[Datei:Achtung.png|50px]]
*MDB-Master Anschluss vom VenCube mit der Steuerung verbinden.
| style="background-color:#FFD700; width:35em"|
*MDB-Slave Anschluss mit allen vorhandenen Zahlungssystemen verbinden. Für zusätzliche MDB-Slave Anschlüsse sollten Y-Kabel genutzt werden.
Do not stick the VenCube antenna on the cable duct above or in the vicinity of the insertion chute, this will lead to disruptions in the bottle acceptance!
*Türschalterposition oben in der Tür, als Ggegenplatte den zweiten Türschalterhalter verwenden.
|}
{{Vorlage:Hinweis vorhandener Türschalter}}
'''More information:'''
{{Vorlage:Hinweis Türschalter als Schließer}}
'''Sonstige Hinweise:'''


*Bei Cashless-Systemen ist je nach Hersteller eine MDB-Verlängerung zu verwenden.
*For cashless systems, depending on the manufacturer, an MDS extension must be used.
*Alternativ zum Schalter kann auch ein Reedschalter (Magnetschalter) verwendet werden. Der Reedschalter sollte 1-2 mm vorstehen.
*A reed switch (magnetic switch) can also be used as an alternative to the switch. The reed switch should protrude 1-2 mm.
*Ohne Cashless-System bleibt die MDB-Slave Schnittstelle unbelegt, deshalb wird die LED1 am VenCube 2x Rot blinken, siehe [[VenCube beta Kurzanleitung]].
*Without a cashless system, the MDB slave interface remains unused, which is why LED1 on the VenCube will flash red twice, see [[Vencube beta user manual]].




Zeile 42: Zeile 28:


| style="vertical-align:top" |
| style="vertical-align:top" |
[[Datei:SiOne_Außen.jpg|200px|thumb|SiOne Außenansicht]]
[[Datei:SiOne_Außen.jpg|200px|thumb|SiOne exterior view ]]
[[Datei:SiOne_Tuerschalter.jpg|200px|thumb|Türschalter]]
[[Datei:Türschalter_Winkel_Sielaff_CCEP_1.jpg|200px|thumb|right|Metal bracket door switch]]
[[Datei:Türschalter_Winkel_Sielaff_CCEP_1.jpg|200px|thumb|right|Türschalter Winkel]]
[[Datei:Türschalter_Winkel_Sielaff_CCEP_2.jpg|200px|thumb|right|Screwed metal bracket door switch]]
[[Datei:Türschalter_Winkel_Sielaff_CCEP_3.jpg|200px|thumb|right|Türschalter Winkel mit Schalter]]
[[Datei:Türschalter_Winkel_Sielaff_CCEP_3.jpg|200px|thumb|right|Door switch metal bracket with switch]]
| style="vertical-align:top" |
| style="vertical-align:top" |
[[Datei:SiOne_VenCube.jpg|200px|thumb|Innenansicht mit VenCube]]
[[Datei:SiOne_VenCube.jpg|200px|thumb|Interior view with Vencube]]
[[Datei:SiOne_Gegenplatte.jpg|200px|thumb|Gegenplatte Türschalter]]
[[Datei:SiOne_Tuerschalter.jpg|200px|thumb|Door switch]]
[[Datei:Türschalter_Winkel_Sielaff_CCEP_2.jpg|200px|thumb|right|Türschalter Winkel verschraubt]]
[[Datei:SiOne_Gegenplatte.jpg|200px|thumb|Door switch counterplate]]
|
|
|}
|}


{| class="wikitable"
== Software version / FTL ==
|-
 
|}


==== Softwarestand / FTL ====
[[Sielaff software designations|What is behind the software name?]]


Anzeige des Softwarestandes im Servicemenü: <code>M - 8 - E - 21 - L</code>
'''Software status:'''


[[Sielaff Softwarebezeichnungen|Was steckt hinter der Softwarebezeichnung?]]
*Versions from 2012 support -Cash Sale- (coin payout)
*In the case of versions older than version <code>V50Dc613.pat</code>, the aforementioned version must first be installed before a more recent software version can be installed.
*Software version of the SiOne should be <code>V50Ec617.pat</code>, with other software the machine could pay out the deposit twice.


'''Softwerestand:'''
'''Check software version:'''  
 
*Versionen ab 2012 unterstützen -Cash Sale- (Münzauszahlung)
*Bei älteren Versionen als Version <code>V50Dc613.pat</code> muss erst vorgenannte Version aufgespielt werden bevor eine aktuellere Softwareversion aufgespielt werden kann.
*Softwarestand des SiOne sollte <code>V50Ec617.pat</code> sein, mit anderer Software könnte der Automat zweimal das Pfandgeld auszahlen.
 
'''Softwarestand überprüfen:'''
{| class="wikitable" border="1"
{| class="wikitable" border="1"
!Aktion/Eingabe
!Action/Enter
!Anzeige im Display
!Shown in the display
|-
|-
|Automatentüre öffnen
|Open the machine door
|[[Datei:SiOne_Text_1.png|175px|right]]
|
Please close machine door!
|-
|-
|Mit der M-Taste bis SERVICEBETRIEB<br />und mit der E-Taste bestätigen
|Use the M button to select SERVICE<br />and confirm with the E button
|[[Datei:SiOne_Text_2.png|175px|right]]
|
SERVICEMODE
|-
|-
|Hinweis "Serviceschlüssel stecken!" beachten.
|"Set the service key!" note.
|[[Datei:SiOne_Text_3.png|175px|right]]
|
Set the service key!
|-
|-
|Servicenummer 21 eingeben...
|Enter service number 21...
|[[Datei:SiOne_Text_4.png|175px|right]]
|
Enter service number 00
|-
|-
|... und mit L-Taste bestätigen.
|... and confirm with the L button.
|[[Datei:SiOne_Text_5.png|175px|right]]
|
Enter service number 21
|-
|-
|Jetzt wird die Softwareversion angezeigt.
|The software version is now displayed.
|[[Datei:SiOne_Text_6.png|175px|right]]
|
Software Machine:
V50Ic213.pat
|}
|}


Zeile 97: Zeile 83:
|-
|-
! width="10%" | Software
! width="10%" | Software
! width="10%" | FTL geeignet
! width="10%" | FTL suitable
! width="20%" | Hinweise
! width="20%" | omment
|-
|-
| V50Dc613.pat
| V50Dc613.pat
| {{Nein}}
| {{Nein}}
| style="text-align:left" | Mindestsoftwarestand für aktuelle Softwareupdates
| style="text-align:left" | Minimum software status for current software updates
|-
|-
| V50Ec617.pat
| V50Ec617.pat
| {{Nein}}
| {{Nein}}
| style="text-align:left" | '''Bevorzugter Softwarestand:'''<br>Mit älterer Software könnte der Automat zweimal das Pfandgeld auszahlen!
| style="text-align:left" | '''Preferred software version:'''<br>With older software, the machine could pay out the deposit twice!
|-
|-
| V50Gc224.pat
| V50Gc224.pat
| {{Nein}}
| {{Nein}}
| {{?}}
|
|-
|-
| V50Ic213.pat
| V50Ic213.pat
Zeile 125: Zeile 111:
|}
|}


==Einstellungen der Steuerung==
== Settings ==


*Automatentyp: Sielaff RN SiOne mit Sielaff-Steuerung
*Automatic type: Sielaff RN SiOne with Sielaff control


===Einstellungen mit Hopper===
===Settings with Hopper===


{|
{|
| style="vertical-align:top;" |
| style="vertical-align:top;" |
{| class="wikitable"
{| class="wikitable"
! colspan="2" |Einstellungen im Automat<br /><code>M - 7 - E</code>
! colspan="3" |Settings in the vending machine control<br /><code>M - 7 - E</code>
|-
|-
| style="width:12em" |Münzahlung
|
| style="width:12em" |mit
|
up to software version<br>
xxx.pat
|
from software version<br>
xxx.pat
|-
| style="width:12em" |Coin payment
| style="width:12em" |With
|
|-
|-
|Kreditsystem
|Credit system
|MDB
|MDB
|
|-
|-
|Buchung abwarten
|Wait for booking
|ja
|Yes
|
|-
|-
|Kreditmodus
|Credit mode
|immer aufbuchen
|Always book up
|
|-
|-
|Always Idle
|Always Idle
|aus
|Off
|
|-
|-
|Sicherheit
|Security
|niedrig
|High
|
|-
|-
|Lottosystem
|Lottery system
|0
|0
|
|}
|}
| style="vertical-align:top; width:5em" |
| style="vertical-align:top; width:5em" |
| style="vertical-align:top;" |
| style="vertical-align:top;" |
{| class="wikitable"
{| class="wikitable"
! colspan="2" |Einstellungen im VenCube mit VenToolWin
! colspan="2" |VenCube settings with [[Ventool]]
|-
|-
| style="width:12em" |Automatenschnittstelle
| style="width:12em" |Vending machine interface
| style="width:12em" |MDB
| style="width:12em" |MDB
|-
|-
|MDB Level
|MDB Level
|Level 3
|Level 2
|-
|-
|CashSale
|CashSale
|EIN (Haken)
|ON (check)
|-
|-
|Flaschenrücknahme
|Bottle return
|JA (Haken)
|YES (check)
|-
|-
|KreditSystem
|Credit system
|ohne Kreditsystem
|Without credit system
|-
|-
|Aufbuchung
|Booking up
|ohne Aufbuchung
|Without booking up
|-
|-
|VenCube Config:<br />[[Medium:Nur hopper.txt|Download]]<br />
|VenCube Config:<br />[[Medium:Nur hopper.txt|Download]]<br />
Bitte mit rechtsklick und "Speichern unter" öffnen!  
Please open with right click and "Save As"!
|
|
  MA5*GW99*2
  MA5*GW99*2
  MA5*GW101*0
  MA5*GW101*0
  MA5*FRA*1
  MA5*FRA*1
  MA5*GW120*1*0*0*3*0*3*0*0
  MA5*GW120*1*0*0*2*0*3*0*0
  MA5*GW133*1
  MA5*GW133*1


Zeile 192: Zeile 193:
|}
|}


===Einstellungen mit Hopper und Karte oder Chip===
===Settings with hopper and card or chip===


{|
{|
| style="vertical-align:top;" |
| style="vertical-align:top;" |
{| class="wikitable"
{| class="wikitable"
! colspan="2" |Einstellungen im Automat<br /><code>M - 7 - E</code>
! colspan="3" |Settings in the vending machine control<br /><code>M - 7 - E</code>
|-
|-
| style="width:12em" |Münzahlung
| style="width:12em" |Coin payment
| style="width:12em" |mit
| style="width:12em" |With
|-
|-
|Kreditsystem
|Credit system
|MDB
|MDB
|-
|-
|Buchung abwarten
|Wait for booking
|ja
|Yes
|-
|-
|Kreditmodus
|Credit mode
|Abg. ohne Karte
|Delivery without a card
|-
|-
|Always Idle
|Always Idle
|aus
|Off
|-
|-
|Sicherheit
|Security
|niedrig
|High
|-
|-
|Lottosystem
|Lottery system
|0
|0
|}
|}
| style="vertical-align:top; width:5em" |
 
| style="vertical-align:top;" |
| style="vertical-align:top;" |
{| class="wikitable"
{| class="wikitable"
! colspan="2" |Einstellungen im VenCube mit VenToolWin
! colspan="4" |Vencube settings with [[Ventool]]
|-
! style="width:12em; vertical-align:top" | Program area
! style="width:12em; vertical-align:top" | Function
! style="width:18em; vertical-align:top" | Option<br>for MDB-card system
! style="width:18em; vertical-align:top" | Option<br>for Vensells CL
|-
| style="vertical-align:top" rowspan="4" | vending machine
| Vending machine interface
| MDB
| MDB
|-
|-
| style="width:12em" |Automatenschnittstelle
| MDB Level
| style="width:12em" |MDB
| Level 2
| Level 2
|-
|-
|MDB Level
| Cash Sale
|Level 3
| ON
| ON
|-
|-
|CashSale
| Bottle return
|EIN
| Yes (check)
| Yes (check)
|-
|-
|Flaschenrücknahme
| Credit system
|JA (Haken)
| Credit system
| MDB
| Without
|-
|-
|Kredit System
| style="vertical-align:top" rowspan="2" | Card system MDB
|MDB
| Booking up
| With Booking up
| With Booking up
|-
|-
|Aufbuchung
| Booking up system
|EIN (Haken)
| MDB booking up
| Vensells CL booking up
|-
|-
|VenCube Config:<br />[[Medium:Hopper karte.txt|Download]]<br />
| colspan="2" style="vertical-align:top;" |Please open with right click and "Save As"!
Bitte mit rechtsklick und "Speichern unter" öffnen!
| Vencube Config:<br />[[Medium:Hopper karte.txt|Download]]<br />
|
MA5*CDS*1*3*3
  MA5*GW99*1
  MA5*GW99*1
  MA5*GW101*1
  MA5*GW101*1*0*0
  MA5*FRA*1
  MA5*FRA*1
  MA5*GW120*1*0*0*3*0*3*0*0
  MA5*GW120*1*0*0*2*0*3*0*0
  MA5*GW133*1
  MA5*GW133*1
| Vencube Config:<br />[[Medium:Hopper_vensells_cl.txt|Download]]<br />
MA5*CDS*3*3*1
MA5*GW99*2
MA5*GW101*1*0*1
MA5*FRA*1
MA5*GW120*1*0*0*2*0*3*0*0
MA5*GW133*1
|}
|}
|}
|}


===Einstellungen mit Karte oder Chip===
===Settings with card or chip===


{|
{|
| style="vertical-align:top;" |
| style="vertical-align:top;" |
{| class="wikitable"
{| class="wikitable"
! colspan="2" |Einstellungen im Automat<br /><code>M - 7 - E</code>
! colspan="3" |Settings in the vending machine control<br /><code>M - 7 - E</code>
|-
|-
| style="width:12em" |Münzahlung
| style="width:12em" |Coin payment
| style="width:12em" |ohne
| style="width:12em" |without
|-
|-
|Kreditsystem
|Credit system
|MDB
|MDB
|-
|-
|Buchung abwarten
|Wait for booking
|ja
|Yes
|-
|-
|Kreditmodus
|Credit mode
|immer aufbuchen
|Always book up
|-
|-
|Always Idle
|Always Idle
|aus
|Off
|-
|-
|Sicherheit
|Security
|niedrig
|High
|-
|-
|Lottosystem
|Lottery system
|0
|0
|}
|}
| style="vertical-align:top; width:5em" |
 
 
| style="vertical-align:top;" |
| style="vertical-align:top;" |
{| class="wikitable"
{| class="wikitable"
! colspan="2" |Einstellungen im VenCube mit VenToolWin
! colspan="4" |Vencube settings with [[Ventool]]
|-
|-
| style="width:12em" |Automatenschnittstelle
! style="width:12em; vertical-align:top" | Program area
| style="width:12em" |MDB
! style="width:12em; vertical-align:top" | Function
! style="width:18em; vertical-align:top" | Option<br>for MDB-card system
! style="width:18em; vertical-align:top" | Option<br>for Vensells CL
|-
| style="vertical-align:top" rowspan="4" | vending machine
| Vending machine interface
| MDB
| MDB
|-
| MDB Level
| Level 2
| Level 2
|-
|-
|MDB Level
| Cash Sale
|Level 3
| ON
| ON
|-
|-
|CashSale
| Bottle return
|EIN
| Yes (check)
| Yes (check)
|-
|-
|Flaschenrücknahme
| Credit system
|JA (Haken)
| Credit system
| MDB
| Without
|-
|-
|Kredit System
| style="vertical-align:top" rowspan="2" | Card system MDB
|MDB
| Booking up
| With Booking up
| With Booking up
|-
|-
|Aufbuchung
| Booking up system
|EIN (Haken)
| MDB booking up
| Vensells CL booking up
|-
|-
|VenCube Config:<br />[[Medium:Nur Karte.txt|Download]]<br />
| colspan="2" style="vertical-align:top;" |Please open with right click and "Save As"!
Bitte mit rechtsklick und "Speichern unter" öffnen!
| Vencube Config:<br />[[Medium:Hopper karte.txt|Download]]<br />
|
MA5*CDS*1*3*3
  MA5*GW99*1
  MA5*GW99*1
  MA5*GW101*1
  MA5*GW101*1*0*0
  MA5*FRA*1
  MA5*FRA*1
  MA5*GW120*1*0*0*3*0*3*0*0
  MA5*GW120*1*0*0*2*0*3*0*0
  MA5*GW133*1
  MA5*GW133*1
| Vencube Config:<br />[[Medium:Hopper_vensells_cl.txt|Download]]<br />
MA5*CDS*3*3*1
MA5*GW99*2
MA5*GW101*1*0*1
MA5*FRA*1
MA5*GW120*1*0*0*2*0*3*0*0
MA5*GW133*1
|}
|}
|}
|}

Aktuelle Version vom 12. März 2025, 14:31 Uhr

Mainpage
Sielaff
FK series
Robimat
Hot drinks vending machine
Stand vending machine
Table Top
Spiral vending machine
Combi vending machine
Bottle return machine

Back to Sielaff overview

Installation instructions

File User manual Vencube beta currently only in German
Download link BA_Vencube_beta_032020.pdf

Vencube assembly and commissioning

Mount the Vencube

The device is assembled by the customer.
Proceed as follows during assembly:

  • Open the machine.
  • Turn off the power to the machine.
  • Determine the optimal installation position:
    Place the VENCUBE as close as possible to the machine controls and payment systems.
    Make sure that the controls are easily accessible.
    Note the cable length.
  • Glue the base plate (holder) and screw it. (Image 1)

If gluing is not possible, the assembly click holder must be screwed diagonally to the designated points in the machine with at least 2 screws1). The screw heads must be complete Sit flush and must not protrude.
1) Hardened countersunk self-drilling screw, ∅ 3.5 according to DIN 7504

  • Clip the VENCUBE into the base plate. (Image 2)
  • Remove the machine controls cover.

The machine must be voltage-free!

  • Disconnect all existing payment systems (1, 2) from the machine control. (Image 3)
  • Connect the cables from the VENCUBE:
  • Connect the (MDB) master connection (3) from the VENCUBE to the vending machine control. (Image 4)
  • Connect the (MDB) slave port (4) to all existing payment systems (5). If necessary, use a Y-cable. (Image 5)
  • If possible, glue the antenna (6) behind a plastic cover. (Image 6)
  • Route the antenna cable.
  • Lay all cables professionally with cable ties.

Never use the existing door switch of the machine, this can destroy the Vencube.

Always connect the door switch as closer to plug 1 with the Vencube.
Use connector "COM" and connector "NO" from the switch.

Image 1
Image 3
Image 5
Image 2
Image 4
Image 6

Vencube Commissioning

  • Turn on the machine.
  • If necessary, adjust the Vencube using the Ventool.
  • If necessary, configure the machine control and the payment systems.
    You can find information on this in the wiki!
  • Wait until both LEDs turn green.
  • Close the door.
  • Test the machine by making a trial vend with change.
  • Open the door again.
  • Enter the data for VENSOFT (serial number, machine number).
  • Perform a cash withdrawal by pressing the “E” button on the Vencube until you hear a beep.
  • Close the door.
  • Commissioning is complete.


  • Place Vencube as close as possible to the vending machine control and payment systems.
  • Glue or screw the base plate into the machine. If the base plate is glued, please press it firmly into place without the Vencube.
  • Power down the machine and disconnect all existing payment systems from the vending machine control.
  • Connect the MDB master port from the VenCube to the vending machine control.
  • Connect the MDB slave port to all existing payment systems. Y-cables should be used for additional MDB slave connections.
  • Install door switch.

Never use the existing door switch of the machine, this can destroy the Vencube.

Always connect the door switch as closer to plug 1 with the Vencube.
Use connector "COM" and connector "NO" from the switch.

Do not stick the VenCube antenna on the cable duct above or in the vicinity of the insertion chute, this will lead to disruptions in the bottle acceptance!

More information:

  • For cashless systems, depending on the manufacturer, an MDS extension must be used.
  • A reed switch (magnetic switch) can also be used as an alternative to the switch. The reed switch should protrude 1-2 mm.
  • Without a cashless system, the MDB slave interface remains unused, which is why LED1 on the VenCube will flash red twice, see Vencube beta user manual.
SiOne exterior view
Metal bracket door switch
Screwed metal bracket door switch
Door switch metal bracket with switch
Interior view with Vencube
Door switch
Door switch counterplate

Software version / FTL

What is behind the software name?

Software status:

  • Versions from 2012 support -Cash Sale- (coin payout)
  • In the case of versions older than version V50Dc613.pat, the aforementioned version must first be installed before a more recent software version can be installed.
  • Software version of the SiOne should be V50Ec617.pat, with other software the machine could pay out the deposit twice.

Check software version:

Action/Enter Shown in the display
Open the machine door 
Please close machine door!
Use the M button to select SERVICE
and confirm with the E button 
SERVICEMODE
"Set the service key!" note. 
Set the service key!
Enter service number 21... 
Enter service number 00
... and confirm with the L button. 
Enter service number 21
The software version is now displayed. 
Software Machine:
V50Ic213.pat
Software FTL suitable omment
V50Dc613.pat ✘ Minimum software status for current software updates
V50Ec617.pat ✘ Preferred software version:
With older software, the machine could pay out the deposit twice!
V50Gc224.pat ✘
V50Ic213.pat ✘
V50Ic329.pat ✘
V50xcxxx.pat

Settings

  • Automatic type: Sielaff RN SiOne with Sielaff control

Settings with Hopper

Settings in the vending machine control
M - 7 - E

up to software version
xxx.pat

from software version
xxx.pat

Coin payment With
Credit system MDB
Wait for booking Yes
Credit mode Always book up
Always Idle Off
Security High
Lottery system 0
VenCube settings with Ventool
Vending machine interface MDB
MDB Level Level 2
CashSale ON (check)
Bottle return YES (check)
Credit system Without credit system
Booking up Without booking up
VenCube Config:
Download

Please open with right click and "Save As"! 

MA5*GW99*2
MA5*GW101*0
MA5*FRA*1
MA5*GW120*1*0*0*2*0*3*0*0
MA5*GW133*1

Settings with hopper and card or chip

Settings in the vending machine control
M - 7 - E
Coin payment With
Credit system MDB
Wait for booking Yes
Credit mode Delivery without a card
Always Idle Off
Security High
Lottery system 0
Vencube settings with Ventool
Program area Function Option
for MDB-card system 		Option
for Vensells CL
vending machine Vending machine interface MDB MDB
MDB Level Level 2 Level 2
Cash Sale ON ON
Bottle return Yes (check) Yes (check)
Credit system Credit system MDB Without
Card system MDB Booking up With Booking up With Booking up
Booking up system MDB booking up Vensells CL booking up
Please open with right click and "Save As"! Vencube Config:
Download
MA5*CDS*1*3*3
MA5*GW99*1
MA5*GW101*1*0*0
MA5*FRA*1
MA5*GW120*1*0*0*2*0*3*0*0
MA5*GW133*1
Vencube Config:
Download
MA5*CDS*3*3*1
MA5*GW99*2
MA5*GW101*1*0*1
MA5*FRA*1
MA5*GW120*1*0*0*2*0*3*0*0
MA5*GW133*1

Settings with card or chip

Settings in the vending machine control
M - 7 - E
Coin payment without
Credit system MDB
Wait for booking Yes
Credit mode Always book up
Always Idle Off
Security High
Lottery system 0


Vencube settings with Ventool
Program area Function Option
for MDB-card system 		Option
for Vensells CL
vending machine Vending machine interface MDB MDB
MDB Level Level 2 Level 2
Cash Sale ON ON
Bottle return Yes (check) Yes (check)
Credit system Credit system MDB Without
Card system MDB Booking up With Booking up With Booking up
Booking up system MDB booking up Vensells CL booking up
Please open with right click and "Save As"! Vencube Config:
Download
MA5*CDS*1*3*3
MA5*GW99*1
MA5*GW101*1*0*0
MA5*FRA*1
MA5*GW120*1*0*0*2*0*3*0*0
MA5*GW133*1
Vencube Config:
Download
MA5*CDS*3*3*1
MA5*GW99*2
MA5*GW101*1*0*1
MA5*FRA*1
MA5*GW120*1*0*0*2*0*3*0*0
MA5*GW133*1
Abgerufen von „https://wiki.vensoft.de/en/index.php?title=SiOne&oldid=5580“