Sielissimo TT Serie: Unterschied zwischen den Versionen

Aus Vensolutions
Zur Navigation springen Zur Suche springen
VisuellWikitext
Keine Bearbeitungszusammenfassung
 
(11 dazwischenliegende Versionen von einem anderen Benutzer werden nicht angezeigt)
Zeile 1: Zeile 1:
Zurück zur [[Sielaff|Sielaffübersicht]]
{{Vorlage:Linkbox Automaten Sielaff}}
Back to [[Sielaff|Sielaff overview]]
== Installation instructions ==
== Installation instructions ==


Zeile 9: Zeile 10:
{|
{|
| style="vertical-align:top; width:40em"|
| style="vertical-align:top; width:40em"|
*VenCube möglichst in der Nähe der Automatensteuerung und den Zahlungssystemen platzieren.
*Place Vencube as close as possible to the vending machine control and payment systems.
*Bodenplatte im Automaten verkleben, oder verschrauben. Fals die Bodenplatte Verklebt wird, bitte ohne Vencube die Bodenplatte fest andrücken.
*Glue or screw the base plate into the machine. If the base plate is glued, please press it firmly into place without the Vencube.
*Automat spannungsfrei schalten und alle vorhandenen Zahlungssysteme von der Automatensteuerung trennen.
*Power down the machine and disconnect all existing payment systems from the vending machine control.
*MDB-Master Anschluss vom VenCube mit der Steuerung verbinden.
*Connect the MDB master port from the VenCube to the vending machine control.
*MDB-Slave Anschluss mit allen vorhandenen Zahlungssystemen verbinden. Für zusätzliche MDB-Slave Anschlüsse sollten Y-Kabel genutzt werden.
*Connect the MDB slave port to all existing payment systems. Y-cables should be used for additional MDB slave connections.
*Türschalter einbauen.
*Install door switch.
{{Vorlage:Hinweis vorhandener Türschalter}}
{{Vorlage:Hinweis vorhandener Türschalter}}
{| class="wikitable"
{| class="wikitable"
| [[Datei:Hinweis.png|50px]]
| [[Datei:Hinweis.png|50px]]
| style="background-color:#b1cded; width:"|
| style="background-color:#b1cded; width:35em"|
Den Türschalter immer als <u>'''Schließer'''</u> an <u>'''Kontakt 1'''</u> mit dem VenCube verbinden.<br /><br />
Always connect the door switch as <u>'''closer'''</u> to <u>'''plug 1'''</u> with the Vencube.<br>Use connector <u>'''"COM"'''</u> and connector <u>'''"NO"'''</u> from the switch.
Bitte überprüfen Sie, dass der Schalter einwandfrei schaltet, kurz bevor die Türe geschlossen ist.
 
Please check that the switch operates properly just before the lock plate is flush with the machine.
|}
|}
| style="vertical-align:top"|
| style="vertical-align:top"|
[[Datei:HG_CVT_A.jpg|200px|thumb|right|HG CVT]]
[[Datei:HG_CVT_A.jpg|200px|thumb|right|HG CVT]]
[[Datei:HG_CVT_S.jpg||200px|thumb|right|Schalterposition]]
[[Datei:HG_CVT_S.jpg||200px|thumb|right|switch position]]
| style="vertical-align:top"|
| style="vertical-align:top"|
[[Datei:HG_CVT_VC.jpg|200px|thumb|VenCube Einbauort]]   
[[Datei:HG_CVT_VC.jpg|200px|thumb|Vencube installation location]]   
|}
|}


==Erstinbetriebnahme==
==Initial commissioning==


{{Vorlage:Hinweis erhöter Datenaustausch}}
{{Vorlage:Hinweis erhöter Datenaustausch}}


== Einstellungen der Steuerung ==
== VMC settings ==


=== Steuerung Auster HG 2540 ===
=== VMC Auster HG 2540 ===


{{Vorlage:Hinweis MDB Sielaff}}
{{Vorlage:Hinweis MDB Sielaff}}
{{Vorlage:Hinweis Software Sielaff}}
{{Vorlage:Hinweis Software Sielaff}}
{{Vorlage:Hinweis Patchmenü Sielaff HG}}


Folgende Einstellungen im Patchmenü vornehmen und im Installationsmenü überprüfen und ggf. dort zusätzlich einstellen.
==== Software version / FTL ====


Das Patchmenü wird über das Servicemenü (M-8-E) mit der Eingabe <code>99M 55M</code> erreicht.
Display of the software status in the service menu: <code>M - 8 - E - 21 - L</code>


{|
{| class="wikitable mw-datatable" style="text-align:center" width="30%" border="1"
|style="vertical-align:top;"|
{| class="wikitable"
! style="background:#FFCBCB" colspan="2" | Einstellungen im Patchmenü<br /><code>M - 8 - E 99M 55M</code><br>Menüstruktur wie in
|-
|-
! Einstellung
! width="10%" | Software
! Option
! width="10%" | Patch menu
! width="10%" | FTL suitable
! width="10%" | Comment
|-
|-
| ALT.PAYOUT
| {{?}} || {{?}} || {{?}} ||
| enabled
|-
| TUBECOUNT
| Coin Mech contr.
|-
| MIXED PAYMENT
| allowed
|-
| MDB-comp.mode
| B.Pract.
|-
| style="vertical-align:top" | SAVE SETTINGS
| yes
Nach betätigen der "E"-Taste<br>
steht "done" als Bestätigung<br>
im Display!
|}
|style="vertical-align:top; width:5em"|
|style="vertical-align:top;"|
{| class="wikitable"
! style="background:#FFEBAD" colspan="3" | Einstellungen im Installationsmenü<br /><code>M - 7 - E</code><br>Menüstruktur wie in
|-
! colspan="2" | Einstellung
! Option
|-
| style="vertical-align:top;" rowspan="1" | > KREDITSYSTEM
| KRED.KONFIG.
| MAN.EINSTELLEN
|-
| style="vertical-align:top;" rowspan="3" | > GELDWECHSLER
| TUBENZÄHLER
| Münzwechsler
|-
| ALT. PAYOUT
| ein
|-
| TUBENLEERMELDUNG
| ggf. Anpassen
|-
| style="vertical-align:top;" rowspan="3" | > KARTENSYSTEM
| MISCHZAHLUNG
| ein
|-
| MIXED PAYM.PRICE
| Barpreisliste
|-
| MDB-comp.mode
| Best Practice
|}
|}
|}


==== Softwarestand / FTL ====
=== VMC Auster HG M32 ===
 
{{Vorlage:Hinweis MDB Sielaff}}
{{Vorlage:Hinweis Software Sielaff}}
{{Vorlage:Hinweis Patchmenü Sielaff HG M32}}
 
==== Software version / FTL ====


Anzeige des Softwarestandes im Servicemenü: <code>M - 8 - E - 21 - L</code>
Display of the software status in the service menu: <code>M - 8 - E - 21 - L</code>


{| class="wikitable mw-datatable" style="text-align:center" width="30%" border="1"
{| class="wikitable mw-datatable" style="text-align:center" width="30%" border="1"
|-
|-
! width="10%" | Software
! width="10%" | Software
! width="10%" | Patchmenü
! width="10%" | Patch menu
! width="10%" | FTL geeignet
! width="10%" | FTL suitable
! width="10%" | Comment
|-
|-
| {{?}} || {{?}} || {{?}}
| {{?}} || {{?}} || {{?}} ||
|}
|}


=== Steuerung Auster HG M32 ===
==== Kreditanzeige bei Münzeinwurf sehr träge ====
 
{{Vorlage:Hinweis MDB Sielaff}}
{{Vorlage:Hinweis Software Sielaff}}


Folgende Einstellungen im Patchmenü vornehmen und im Installationsmenü überprüfen und ggf. dort zusätzlich einstellen.
Das Patchmenü wird über das Servicemenü (M-8-E) mit der Eingabe <code>99M 55M</code> erreicht.
{|
|style="vertical-align:top;"|
{| class="wikitable"
{| class="wikitable"
! style="background:#FFCBCB" colspan="2" | Einstellungen im Patchmenü<br /><code>M - 8 - E 99M 55M</code><br>Menüstruktur wie in
| [[Datei:Hinweis.png|50px]]
| style="background-color:#b1cded; width:50em"|
Credit display very sluggish when inserting coins:<br>
#Under: Menu &rArr; Installation &rArr; Deactivate card system 2
#Under: Menu &rArr; Installation &rArr; Special setting C,<br>
set the MDB polling rate to 100ms or 50ms!<br>
|-
|-
! Einstellung
| [[Datei:Achtung.png|50px]]
! Option
| style="background-color:#FFD700;"|
Adjust the MDB polling rate only in selected individual cases!<br>
There may be problems with the display!
|-
|-
| ALT.PAYOUT
|colspan="2" |
| enabled
The table shows the bit mask for the desired settings, please set appropriately.
|-
 
| TUBECOUNT
| Coin Mech contr.
|-
| MIXED PAYMENT
| allowed
|-
| MDB-comp.mode
| B.Pract.
|-
| style="vertical-align:top" | SAVE SETTINGS
| yes
Nach betätigen der "E"-Taste<br>
steht "done" als Bestätigung<br>
im Display!
|}
|style="vertical-align:top; width:5em"|
|style="vertical-align:top;"|
{| class="wikitable"
{| class="wikitable"
! style="background:#FFEBAD" colspan="3" | Einstellungen im Installationsmenü<br /><code>M - 7 - E</code><br>Menüstruktur wie in
| style="vertical-align:top" |01
| style="vertical-align:top" |For cold water products, the cup price becomes 0.00
|-
|-
! colspan="2" | Einstellung
| style="vertical-align:top" |02
! Option
| style="vertical-align:top" |IR readout/configuration only active when entered in the menu level (no menu selected)
|-
|-
| style="vertical-align:top;" rowspan="1" | > KREDITSYSTEM
| style="vertical-align:top" |04
| KRED.KONFIG.
| style="vertical-align:top" |Output all error messages in clear text
| MAN.EINSTELLEN
|-
|-
| style="vertical-align:top;" rowspan="3" | > GELDWECHSLER
| style="vertical-align:top" |08
| TUBENZÄHLER
| style="vertical-align:top" |pressure cell old (0.5 .. 4.5V
| Münzwechsler
|-
|-
| ALT. PAYOUT
| style="vertical-align:top" |16
| ein
| style="vertical-align:top" |Water shortage detection deactivated via the measuring turbine (espresso machines)
|-
|-
| TUBENLEERMELDUNG
| style="vertical-align:top" |32
| ggf. Anpassen
| style="vertical-align:top" |BARISTA: When the milk cleaning time (Def. = 36h) is reached, the milk products are not taken out of service.
|-
|-
| style="vertical-align:top;" rowspan="3" | > KARTENSYSTEM
| style="vertical-align:top" |64
| MISCHZAHLUNG
| style="vertical-align:top" |Reduce MDB polling rate to 100ms
| ein
|-
|-
| MIXED PAYM.PRICE
| style="vertical-align:top" |128
| Barpreisliste
| style="vertical-align:top" |Shorten MDB polling rate to 50ms, gains over 64
|-
| MDB-comp.mode
| Best Practice
|}
|}
|}
|}


==== Softwarestand / FTL ====
== Problem solving ==


Anzeige des Softwarestandes im Servicemenü: <code>M - 8 - E - 21 - L</code>
[[Problem solving|Troubleshooting Overview]]


{| class="wikitable mw-datatable" style="text-align:center" width="30%" border="1"
*[[Problem solving#The vending machine does not give change|With Sielaff vending machines, "Please wait" appears in the machine display and no sale is possible.]]
|-
*[[Problem solving#The vending machine doesn't give change|The vending machine doesn't give change.]]
! width="10%" | Software
*[[Problem solving#No coins accepted and no change given out at Sielaff machines|No coins accepted and no change given out at Sielaff machines.]]
! width="10%" | Patchmenü
*[[Problem solving#When free vend is activated, it is not possible to flush the Sielaff HG machine|When free vend is activated, it is not possible to flush the Sielaff HG machine.]]
! width="10%" | FTL geeignet
|-
| {{?}} || {{?}} || {{?}}
|}


[[Kategorie:Index]]
[[Kategorie:Index]]
[[Kategorie:Sielaff]]
[[Kategorie:Sielaff]]

Aktuelle Version vom 12. März 2025, 11:29 Uhr

Mainpage
Sielaff
FK series
Robimat
Hot drinks vending machine
Stand vending machine
Table Top
Spiral vending machine
Combi vending machine
Bottle return machine

Back to Sielaff overview

Installation instructions

File User manual Vencube beta currently only in German
Download link BA_Vencube_beta_032020.pdf

Vencube assembly and commissioning

Mount the Vencube

The device is assembled by the customer.
Proceed as follows during assembly:

  • Open the machine.
  • Turn off the power to the machine.
  • Determine the optimal installation position:
    Place the VENCUBE as close as possible to the machine controls and payment systems.
    Make sure that the controls are easily accessible.
    Note the cable length.
  • Glue the base plate (holder) and screw it. (Image 1)

If gluing is not possible, the assembly click holder must be screwed diagonally to the designated points in the machine with at least 2 screws1). The screw heads must be complete Sit flush and must not protrude.
1) Hardened countersunk self-drilling screw, ∅ 3.5 according to DIN 7504

  • Clip the VENCUBE into the base plate. (Image 2)
  • Remove the machine controls cover.

The machine must be voltage-free!

  • Disconnect all existing payment systems (1, 2) from the machine control. (Image 3)
  • Connect the cables from the VENCUBE:
  • Connect the (MDB) master connection (3) from the VENCUBE to the vending machine control. (Image 4)
  • Connect the (MDB) slave port (4) to all existing payment systems (5). If necessary, use a Y-cable. (Image 5)
  • If possible, glue the antenna (6) behind a plastic cover. (Image 6)
  • Route the antenna cable.
  • Lay all cables professionally with cable ties.

Never use the existing door switch of the machine, this can destroy the Vencube.

Always connect the door switch as closer to plug 1 with the Vencube.
Use connector "COM" and connector "NO" from the switch.

Image 1
Image 3
Image 5
Image 2
Image 4
Image 6

Vencube Commissioning

  • Turn on the machine.
  • If necessary, adjust the Vencube using the Ventool.
  • If necessary, configure the machine control and the payment systems.
    You can find information on this in the wiki!
  • Wait until both LEDs turn green.
  • Close the door.
  • Test the machine by making a trial vend with change.
  • Open the door again.
  • Enter the data for VENSOFT (serial number, machine number).
  • Perform a cash withdrawal by pressing the “E” button on the Vencube until you hear a beep.
  • Close the door.
  • Commissioning is complete.


  • Place Vencube as close as possible to the vending machine control and payment systems.
  • Glue or screw the base plate into the machine. If the base plate is glued, please press it firmly into place without the Vencube.
  • Power down the machine and disconnect all existing payment systems from the vending machine control.
  • Connect the MDB master port from the VenCube to the vending machine control.
  • Connect the MDB slave port to all existing payment systems. Y-cables should be used for additional MDB slave connections.
  • Install door switch.

Never use the existing door switch of the machine, this can destroy the Vencube.

Always connect the door switch as closer to plug 1 with the Vencube.
Use connector "COM" and connector "NO" from the switch.

Please check that the switch operates properly just before the lock plate is flush with the machine.

HG CVT
switch position
Vencube installation location

Initial commissioning

After the VMC is switched on for the first time with the Vencube connected, there is increased data exchange between the controller and the Vencube. As a result, the VMC cannot be operated for up to ten minutes, or only very slowly, and coin acceptance and payout can be disrupted at the same time. After the waiting time, the machine will work again without any problems.

VMC settings

VMC Auster HG 2540

Note:
These VMC all have MDB interfaces, the Vencube should therefore also be operated directly via MDB without adapter boards or cable harnesses and not via BDV master cable. Depending on which cashless payment system is connected to the Vencube, a BDV or MDB slave cable is to be used here. For coin changers and bill readers, always MDB is preferable.

Note:
Depending on the type of VMC and the software version of the VMC, not all setting options may be available, and the points that are not available can then be skipped. It may also be possible that the setting items have a German or English name, or that the texts are displayed somewhat differently.

Make the following settings in the patch menu and check them in the installation menu and make additional settings there if necessary.

The patch menu is reached via the service menu (M-8-E) by entering 99M 55M.

Settings in the patch menu
M - 8 - E 99M 55M
Menu structure as in
Settings Options
ALT.PAYOUT enabled
TUBECOUNT COIN MECH contr.
MIXED PAYMENT allowed
MDB-comp.mode B.Pract.
SAVE SETTINGS yes

After pressing the "E" key
"done" stands for confirmation
in the display!

Settings in the installation menu
M - 7 - E
Menu structure as in
Settings Options
> CREDIT SYSTEM CRED. CONFIG. MAN.CONFIG.
> COIN MECHANISM TUBE COUNT by COINMECH
ALT. PAYOUT on
TUBES EMPTY INFO A
> CARD READER MIXED PAYM. on
MIXED PAYM.PRICE cash price
MDB-comp.mode Best Practice

Note:
The previously made settings must be checked again after a software update of the VMC.

Software version / FTL

Display of the software status in the service menu: M - 8 - E - 21 - L

Software Patch menu FTL suitable Comment

VMC Auster HG M32

Note:
These VMC all have MDB interfaces, the Vencube should therefore also be operated directly via MDB without adapter boards or cable harnesses and not via BDV master cable. Depending on which cashless payment system is connected to the Vencube, a BDV or MDB slave cable is to be used here. For coin changers and bill readers, always MDB is preferable.

Note:
Depending on the type of VMC and the software version of the VMC, not all setting options may be available, and the points that are not available can then be skipped. It may also be possible that the setting items have a German or English name, or that the texts are displayed somewhat differently.

Make the following settings in the patch menu and check them in the installation menu and make additional settings there if necessary.

The patch menu is reached via the service menu (M-8-E) by entering 99M 55M.

Settings in the patch menu
M - 8 - E 99M 55M
Menu structure as in
Settings Options
ALT.PAYOUT enabled
TUBECOUNT COIN MECH contr.
MIXED PAYMENT allowed
MDB-comp.mode B.Pract.
SAVE SETTINGS yes

After pressing the "E" key
"done" stands for confirmation
in the display!

Settings in the installation menu
M - 7 - E
Menu structure as in
Settings Options
> CREDIT SYSTEM CRED. CONFIG. MAN.CONFIG.
> COIN MECHANISM TUBE COUNT by COINMECH
ALT. PAYOUT on
TUBES EMPTY INFO A
> CARD READER MIXED PAYM. on
MIXED PAYM.PRICE cash price
MDB-comp.mode Best Practice

Note:
The previously made settings must be checked again after a software update of the VMC.

Software version / FTL

Display of the software status in the service menu: M - 8 - E - 21 - L

Software Patch menu FTL suitable Comment

Kreditanzeige bei Münzeinwurf sehr träge

Credit display very sluggish when inserting coins:

  1. Under: Menu ⇒ Installation ⇒ Deactivate card system 2
  2. Under: Menu ⇒ Installation ⇒ Special setting C,

set the MDB polling rate to 100ms or 50ms!

Adjust the MDB polling rate only in selected individual cases!
There may be problems with the display!

The table shows the bit mask for the desired settings, please set appropriately.

01 For cold water products, the cup price becomes 0.00
02 IR readout/configuration only active when entered in the menu level (no menu selected)
04 Output all error messages in clear text
08 pressure cell old (0.5 .. 4.5V
16 Water shortage detection deactivated via the measuring turbine (espresso machines)
32 BARISTA: When the milk cleaning time (Def. = 36h) is reached, the milk products are not taken out of service.
64 Reduce MDB polling rate to 100ms
128 Shorten MDB polling rate to 50ms, gains over 64

Problem solving

Troubleshooting Overview

Abgerufen von „https://wiki.vensoft.de/en/index.php?title=Sielissimo_TT_Serie&oldid=5565“